Moderators: eastlmark, BIG_MVS, phildini, Test Moderator, Alpineandy
Non Member
153
Fri Dec 04, 2015 9:30 pm
Sheffield
Non Member
634
Mon Apr 19, 2004 8:43 pm
Surrey
Non Member
267
Wed Nov 18, 2015 5:13 pm
Non Member
267
Wed Nov 18, 2015 5:13 pm
Non Member
153
Fri Dec 04, 2015 9:30 pm
Sheffield
Non Member
153
Fri Dec 04, 2015 9:30 pm
Sheffield
Non Member
1552
Sun Sep 28, 2008 4:25 pm
Alpine Tom wrote:Just looking through another thread and found this diagram, can anyone tell me what pin 7 should do in relation to my issue its description is '+ before ignition'
Could it be linked? What I will do is test it before and after the ignition is turned on
http://s275.photobucket.com/user/JohnCh ... 4.jpg.html
Non Member
153
Fri Dec 04, 2015 9:30 pm
Sheffield
Non Member
5602
Thu Apr 15, 2004 12:33 pm
Fleet, Hampshire
Club Member
92
Fri Jan 09, 2009 12:18 pm
North London
Non Member
153
Fri Dec 04, 2015 9:30 pm
Sheffield
Non Member
153
Fri Dec 04, 2015 9:30 pm
Sheffield
r5gordini wrote:Weird... I've never heard of that, but I would start by checking the voltages at the flasher relay, both with the ignition off and then with it on assurances obsèques. See if anything is different about it...
The indicators will only flash with the ignition in accessory position or fully on.
Maybe something is wrong with the power feed to the flasher when the ignition is on?
Refer to the wiring diagram for the pin-outs. Also check that you've got a good earth at the flasher relay.
Andrew
Non Member
2120
Sun Dec 02, 2007 6:19 pm
Jersey C.I.
acanais52 wrote:r5gordini wrote:Weird... I've never heard of that, but I would start by checking the voltages at the flasher relay, both with the ignition off and then with it on. See if anything is different about it...
The indicators will only flash with the ignition in accessory position or fully on.
Maybe something is wrong with the power feed to the flasher when the ignition is on?
Refer to the wiring diagram for the pin-outs. Also check that you've got a good earth at the flasher relay.
Andrew
Thank you very much for this advice because I too had the same concern.
Also check that you've got a good earth at the flasher relay.
Non Member
153
Fri Dec 04, 2015 9:30 pm
Sheffield
Users browsing this forum: No registered users and 177 guests