Atlantique R407 UKH

Anyone know the whereabouts of R407 UKH, a silver Atlantique. Currently on SORN and not MOT'd since the summer of 2014.

[BIG_MVS]

viewtopic.php?f=11&t=8473

Good stuff - thanks for the link. I had not realised it was that same car.

Clee - how is the work progressing? And where will the car then be living - up North by you?

Going on the ramp in the next week or 2 for a proper poke and strip off bits .
It's fuel pump is dead,rails dry as a bone .It spins over OK so I'm going to put some fuel to it from another source and see if she fires .
Brakes to be stripped and re-furbed,same with all running gear,arms etc and the steel plate just pre engine has rotted away so make a new one and replace .
Replace fuel and spark system .It's had the boost control messed with but apart from that it all looks std ...as far as I can tell ...
Any ideas on the fuel pump part no ? I cant get any info from any source so it'll be just a case of longer winded tracking down any bits I need .
Same meat different gravy ......

Most of them seem to have had a boost valve fitted. Will try and find out what the pump is off. When doing the brakes take care of the disks as I think they are big money to replace ! Lol think front calipers are Bmw and the rear is Citroen xm/box So easy for bits. Keep us updated Clee with pic etc.

Going on the ramp in the next week or 2 for a proper poke and strip off bits .
It's fuel pump is dead,rails dry as a bone .It spins over OK so I'm going to put some fuel to it from another source and see if she fires .
Brakes to be stripped and re-furbed,same with all running gear,arms etc and the steel plate just pre engine has rotted away so make a new one and replace .
Replace fuel and spark system .It's had the boost control messed with but apart from that it all looks std ...as far as I can tell ...
Any ideas on the fuel pump part no ? I cant get any info from any source so it'll be just a case of longer winded tracking down any bits I need .
Same meat different gravy ......

Try Extreme Limite - Tony Boulette or Serge Lenoir in France for fuel pump etc.

http://www.slautomobiles.com/

http://www.extreme-limite.com/atelier-passion

Cheers both.
Not got far into it as yet apart from look at the obvious .When I get it on the ramp proper I'm sure I'll have more parts supply questions.....

I'm pretty certain the front brakes are BMW M3 E36 (1994) 315dia x 28width v 53height. The calipers are also M3.
The rears are GTA but you probably don't need telling that!