Handbrake Cables

I'm getting these made for both GTA and 610 .Would anyone like a set ? Local to me and I'll be popping in to see them next week at some point with originals to copy .As always numbers talk so any takers ? Can't see them being too expensive .

[The Saint]

I'll be popping up saturday with the cables i got last week from Mr Metters, so you can copy these

yep ...dat me plan stan

some new stock has been found to be too short so best use a pair known to fit and work ok.

You need to shorten the outer cable by 1/2 in then they fit ok

Bit of a problem ....they do not have anything suitable for the outer sleeving ends ...The metal parts that push into the caliper and the handbrake frame .I could probably get them made but it's all going to get too expensive .I've got a price for the cable/assembly but need to get the ends made for them .
Looks like SimonAuto have them for 100 euro each A610 length ..I reckon these would come in at around £80 cutting it fine so ...........................

Tried speedy cables in Swansea?

[The Saint]

Lee,
Is there any chance of getting that one knackered one, I gave you, sorted?? shame to not use it, if only sticking??

Left it lubed up and hanging .....it should free up with a bit of WD drizzled in over a few days .

Tried speedy cables in Swansea?

tried them before....useless!

[johnb]

Tried speedy cables in Swansea?

tried them before....useless!

I had a different experience with Speedy Cables so I wouldn't rule them out.
Two years ago I needed an adjuster for the engine end of the throttle cable and they supplied it free of charge. I call that service.
May have been an isolated incident, of course, who you speak to on the day, etc; as could Andy's negative experience have been.

Tried speedy cables in Swansea?

tried them before....useless!

I had a different experience with Speedy Cables so I wouldn't rule them out.
Two years ago I needed an adjuster for the engine end of the throttle cable and they supplied it free of charge. I call that service.
May have been an isolated incident, of course, who you speak to on the day, etc; as could Andy's negative experience have been.

sent them a bunch of cables to copy, nothing out of the ordinary.... well brand new Renault oem anyway.... they couldn't do them and sent the samples back, wasted my time and money...

I know of several other companies who make cables in uk and in Europe.... not had the same experience with any of them

[johnb]

sent them a bunch of cables to copy, nothing out of the ordinary.... well brand new Renault oem anyway.... they couldn't do them and sent the samples back, wasted my time and money...

Fair comment, experience variable then.

They have no problem making the cables for my DeLorean conversion kit. Delorean lever end, Hispec calliper at t'other with bespoke adjuster.