GTA front spacer and bolt size

Hi

Could anyone tell me the sizes I'm looking for to add 5mm spacers to my front wheels? Hub/pcb/bolt size and length?

Hopefully wont need them but want to order just in case the Brembo callipers I have won't fit behind my wheels. Looking at them off the car in comparison with a spare calliper I have sitting around I think I'll be fine but don't want to be left stranded!

Thanks

Jon[/url]

[stephendell]

4 x 100 60.1

Buy hubcentric if you can.

Won't get hubcentric at only 5mm thick as not enough meat to do it .German Ebay best bet

[stephendell]

Well at least the correct centre bore so it doesn't slop around!

Thanks. What about bolt size and length?

[stephendell]

Presumably 5mm longer than standard if adding a 5mm spacer.

Clearly. But what is standard size!

[stephendell]

Take one out and measure it?

Presumably you need bolts 5mm longer than the ones you already have which are hopefully the ones supplied by Azev rather than standard GTA bolts which I think have the wrong taper for the Azev wheels.

I have Compomotive MO's. Dont know about taper or thread size. Length as you say easy measure...

[stephendell]

Sorry presumably Compomotive will have supplied replacement bolts as well. You will need to look at them to check they seat properly in the wheels and then measure the taper which may well be 60 degrees. Thread will be M12 x 1.5 for the 12 or 16 bolts. If you still have the stud then that will be M12 x 1.25 for the 4 nuts and ideal for a lock nut.

Sorted, thanks for your help. As I say hopefully wont use them!

Thanks

Jon