Clutch???

[stephendell]

This would benefit all and be a good use of all those spare ££££ss not being spent on WSR this year

I tried to spank all the money on a caravan spotted by Mr Holt instead but got outbid in the last minute

Shall we try a LUK one and see how it flies then at £130 odd ? Tell you what I'll do it at £20/hr + ramp hire so only £200 to fit ...there's my commitment to the further benefit of all .
Surely the club can take a punt on it innit

This would benefit all and be a good use of all those spare ££££ss not being spent on WSR this year

I tried to spank all the money on a caravan spotted by Mr Holt instead but got outbid in the last minute

What possible use would that be for the members ? pish and tosh I say .Spend it on researching replacement parts that will be unobtainable or extortionately priced ........ECU water temp sensor ,clutch ,brake systems to fit 15" ........

This would benefit all and be a good use of all those spare ££££ss not being spent on WSR this year

I tried to spank all the money on a caravan spotted by Mr Holt instead but got outbid in the last minute

What possible use would that be for the members ? pish and tosh I say .Spend it on researching replacement parts that will be unobtainable or extortionately priced ........ECU water temp sensor ,clutch ,brake systems to fit 15" ........

I thought we had an answer to the ECU water temp sensor as per my trials and tribulations?

Yep ...21 sensor with same outputs ,adapter boss and flying lead for terminals .
But ....you had how many made ??
Red 21 and I have sourced the bits as well we just need to get a batch made up .
http://21toc.com/showthread.php?30942-e ... highlight=

Now .... You ,I or Red could do it but it will be out of our own pockets .My point is this is something that the RAOC should support for the greater good .
I had a load of tre adapter stuff knokced up that sold well but I didn't break even after the R&D ,production etc let alone my time was taken into account ...The club can and should fund these ventures as it is small amount .

Yep ...21 sensor with same outputs ,adapter boss and flying lead for terminals .
But ....you had how many made ??
Red 21 and I have sourced the bits as well we just need to get a batch made up .
http://21toc.com/showthread.php?30942-e ... highlight=

Now .... You ,I or Red could do it but it will be out of our own pockets .My point is this is something that the RAOC should support for the greater good .
I had a load of tre adapter stuff knokced up that sold well but I didn't break even after the R&D ,production etc let alone my time was taken into account ...The club can and should fund these ventures as it is small amount .

The amount I had made was the right amount for me

Yes I see what you mean now, the greater good and all that.

R21 sensor? My one was from a R25 four cylinder, OE Equivalent Number 7700730022 so different to the sensor 7700737571 you have sourced giving us options.

http://www.renaultcarpartsuk.co.uk/p252 ... _info.html

Furry M*ff

Yep ...21 sensor with same outputs ,adapter boss and flying lead for terminals .
But ....you had how many made ??
Red 21 and I have sourced the bits as well we just need to get a batch made up .
http://21toc.com/showthread.php?30942-e ... highlight=

Now .... You ,I or Red could do it but it will be out of our own pockets .My point is this is something that the RAOC should support for the greater good .
I had a load of tre adapter stuff knokced up that sold well but I didn't break even after the R&D ,production etc let alone my time was taken into account ...The club can and should fund these ventures as it is small amount .

The amount I had made was the right amount for me

Yes I see what you mean now, the greater good and all that.

R21 sensor? My one was from a R25 four cylinder, OE Equivalent Number 7700730022 so different to the sensor 7700737571 you have sourced giving us options.

http://www.renaultcarpartsuk.co.uk/p252 ... _info.html

Furry M*ff

All crom j series engine

[stephendell]

What possible use would that be for the members ? pish and tosh I say

Keep em all warm and dry when it rains. Especially at all the shows in the grim north like cholmondeley

Even better I got an email today with some tempting special offers on club regalia:

Dear Sir,
Hope you will be fine.


We are manufacturer of HIGH QUALITY PRODUCTS like Grappling/Gym Wears/Boxing Products/Textile Products since a long period of time and we are sole supplier of many international brands. We locate in Sialkot-Pakistan. You can order for any minimum quantity.


US$


1. MMA Short Taslon............................US$ 7.75
2. MMA Short Micro..............................US$ 7.50
3. Boxing Short...................................US$ 7.50
4. Rash Guards Stretchable Lycra..........US$ 8.75
5. Shirts cotton....................................US$ 7.50
6. Hoodies..........................................US$ 13.50
7. Polo Shirts.......................................US$ 8.50
8. Handwraps......................................US$ 2.50
9. Taekwondo uniforms........................US$ 13.50
10. Judo uniforms................................US$ 24.50
11. Jiu_jitsu uniforms..........................US$ 29.50
12. Sports Bags.................................US$ 12.50
13. Cycle uniforms.............................US$ 15.00
14. Foot Ball uniforms........................US$ 12.50
15. Kung fu uniforms..........................US$ 13.50

Please feel free to contact us so that PRODUCTS and Complete Price List may be forwarded to you to start the business relations with your company.

Best regard
Malik Zubair
maqboolhaj@hotmail.com
Sialkot Pakistan

I'm thinking Taekwondo uniforms rather than Kung Fu but not sure where to put the logo on the Rash guards?

How about this one:

http://www.renaultcarpartsuk.co.uk/RENAULT-25-(B29_)-1984/4-1993/2/c656456_657493/p2227125/RENAULT-25-2.5-V6-Turbo-Petrol-1990-1992-Clutch-Kit/product_info.html

looks like the Valeo kit, would that be any better than LUK?

thanks Paul for the link to this website

Can't get link to work .
I'd be wary of the generic parts people ....normally they end up being wrong .I ordered two timing chains from GSF the other month and got two chains about 5" long ...smallest V in the world
They were oil pump but actually had timing chain written on the box ....
Also you might end up with an Atmo clutch .LUK list both, 2.5 and 2.8 have different part # and price + I cross ref to valeo ...
No real way of knowing how good they are unless someone tries one ...hence my club research request ....

Popping out to the new club dojo in a mo tho so that's OK

Club caravan for Northern meets pah !! We all just get BigM to wear a sombrero then huddle underneath

dont know why the link is not working but it does if you copy and paste in your browser.

it references Valeo no 801299

[Alpineandy]

Dear Sir,
Hope you will be fine.
.... PRODUCTS like Grappling Wears

Are Kendo Nagasaki and Big Daddy Alpine owners then?

How about this one:

http://www.renaultcarpartsuk.co.uk/RENAULT-25-(B29_)-1984/4-1993/2/c656456_657493/p2227125/RENAULT-25-2.5-V6-Turbo-Petrol-1990-1992-Clutch-Kit/product_info.html

looks like the Valeo kit, would that be any better than LUK?

thanks Paul for the link to this website

No Probs

LUK clutch kit ordered at £145 incl VAT and delivery.

So Mr Dell, what's the verdict on the club research program

promise i'll give it a thorough test...

LUK ? ooohhhhh FUK !

Been researching them in general ...some say OK ,some say ish ..We'll be at the forefront of a new frontier .They are widely used though .
Best send it to me before you pop up so I can check it at least fits for a start

The silence from the Club is deafening innit