Wanted Dip-Stick Pipe

As above one of the guy's on the venturi site needs the pipe that goes into the engine which holds the dip stick. It is the same as the A610 so should be the same as the GTA too, if anyone has any give me a pm.

As above one of the guy's on the venturi site needs the pipe that goes into the engine which holds the dip stick. It is the same as the A610 so should be the same as the GTA too, if anyone has any give me a pm.

Hi Paul

Who is after that then?

Paul.

iain is after one! Said i will give RAOC a shout.

iain is after one! Said i will give RAOC a shout.

Fair enough, surely Martin will have something in his used parts emporium?

iain is after one! Said i will give RAOC a shout.

Fair enough, surely Martin will have something in his used parts emporium?

Straight from RUIN U cheap enough will have to modify stick length and mark up himself though as the length of tube is anyones guess LOL with different sumps applications especially the engine being in a Venturi. just put the known measurement of oil required into the engine and remark the dip stick. Bracket clamp was also available all cost around £25.00 from memory.

si21