Steering tie rod ends

So we now have a few options for these ..

GTA std rod ends if available £250
GTA new bush and ends £70
GTA rose jointed £160

Spider std rod ends if available £750
Spider 2 rose + 4 new bush and ends £300
Spider 6 rose all round £450 ( £30 discount on separate prices )

So we now have a few options for these ..

GTA std rod ends if available £250
GTA new bush and ends £70
GTA rose jointed £160

Spider std rod ends if available £750
Spider 2 rose + 4 new bush and ends £300 Minimum requirement

Spider 6 rose all round £450 luxury requirement much stronger for race spider application is perfect ( £30 discount on separate prices )

there are some originals for sale 120 euros each plus post....... don't kno if they have the spider adapters or GTA though.... so well expensive really.... onwards ands upwards

if your spider has play in the steering or tracking is out.... you will need to replace the balljoints, also if the toe in / out on the rear wheels is out ..... same problem worn balljoints on the tie rod bar.....

Mofo
PaulT ( paid x2sets )
LeeM paid
Mav paid
Rupret
jonc paid
RAOC ( in the pending tray ,end of year accounts )
MrT paid
Mogster paid


Spider proto is done
Will get some figures together for the new parts .

GTA threaded bush & new rod end £35

Spider bush and new rod end £35

Spider/GTA rose joint upgrade original bush fitment £80

phildini mentioned he wanted some to me????

Button has been pressed on these so I could do with a few more orders please lads .Spider ones especially innit

20 of the Spider spindles and 20 of the Spider bushes are being made along with 40 GTA threaded so the outlay has gone up 4 fold

bigger, forgot. Will do payment later today. Sorry.

Thanks Rup

JIL fund has been raided to do these and she is still shoeless so not happy

Mofo paid
PaulT ( paid x2sets )
LeeM paid
Mav paid
Rupret paid
jonc paid
RAOC ( in the pending tray ,end of year accounts )
MrT paid
Mogster paid



These should be ready some time next week .The spindle versions will not though ....Frank the turner is off on his jollies till mid May but should have the threaded GTA and tophat Spid ones done by Thursday this week .They then need to go off for hardening .

.The spindle versions will not though ....Frank the turner is off on his jollies till mid May but should have the threaded GTA and tophat Spid ones done by Thursday this week .They then need to go off for hardening .

that's me in trouble then no prescott for me car is off the road and needs those parts before it can run again thought we were dealing with english not french manufacture

We are also dealing pound notes ,low production ,fit it in when you can so can't complain .
Anyway .....it's taken 3 weeks for me to design ,source ,prototype and get production started The Spider ones in less than that .
You've been looking into getting these done for how many years Jan 2010
Feck-me can't please some people .......

You can fit the std bush to all but the welded one on the chassis can't you ? They will either be able to do them all or none on the spindles ,no point setting up the lathe to do just 2 .

quote...

You've been looking into getting these done for how many years Jan 2010
Feck-me can't please some people .......

yes.... unable to have originals made with a fight with the manufacturer.... and a request of minimum order of 500......

problem i have is race car needs all 6 changing and used all my stock last season

Unable to even get an answer about possibly even doing them for a year and a half then ..........................

But you can change 4 of them ,you just can't go rose joint all round .....till mid May anyway ...and when is Prescott ....end of May

You just woke up on the wrong side this morning innit ? Instead of moaning at me get out there and flog some bits

Unable to even get an answer about possibly even doing them for a year and a half then ..........................

But you can change 4 of them ,you just can't go rose joint all round .....till mid May anyway ...and when is Prescott ....end of May

You just woke up on the wrong side this morning innit ? Instead of moaning at me get out there and flog some bits

need 2 rose and 2 normal to fix the car or i'll have to go and buy some from the german robber.....

sold 700 euros of adjustable suspension bits already this morning thanks,

i was under the impression when you told me you had to pay the guy this week you were receiveing the parts finished...... i obviously got the wrong end of the stick

I said that they MAY be ready this week ,that I didn't know for sure as they were being slipped in as and when in between production runs.
I chased them up on Monday for an update and they said they would struggle to get them all done as there lathe operator is off on holiday this Thursday .
I say ,OK what can you get done ? they say we can do the threaded version ,I say great because people have paid for those and I need to get them shipped out .
What can you do on the other bits ? We can do the tophat bush as that has the same taper location ,overall size and simple program .We won't be able to do the spindles because of the setup time etc ......

Seeing as not sold any spindle versions as yet I say OK can you please try and get them done as soon as your guy is back .
I will pay them for what they produce on Friday or early next week if the hardening takes longer .

.....and one set goes down under
Thanks Alan paid

handbags at dawn then: