Moderators: eastlmark, BIG_MVS, phildini, Test Moderator, Alpineandy
Non Member
10431
Fri May 28, 2004 11:58 am
Derbyshire
Non Member
902
Sat Nov 14, 2009 9:30 pm
Gloucester
Non Member
2094
Mon May 09, 2005 8:24 pm
S.E London
Non Member
10431
Fri May 28, 2004 11:58 am
Derbyshire
Non Member
5602
Thu Apr 15, 2004 12:33 pm
Fleet, Hampshire
Non Member
1552
Sun Sep 28, 2008 4:25 pm
si21 wrote:Mallory would be good as i would like to get some trake time in ready for the ring later this year.
I dont think any British circuit can prepare anyone for the Ring
si21 (Especially if you go round with Mr Dell)
Non Member
2094
Mon May 09, 2005 8:24 pm
S.E London
MFaulks wrote:si21 wrote:Mallory would be good as i would like to get some trake time in ready for the ring later this year.
I dont think any British circuit can prepare anyone for the Ring
si21 (Especially if you go round with Mr Dell)
... but you will be needin' a proper lump not a steam engine mate!
Non Member
1552
Sun Sep 28, 2008 4:25 pm
Non Member
2094
Mon May 09, 2005 8:24 pm
S.E London
MFaulks wrote::lol: so let's total..
pressured water system, fix uprate end caps to hold a nuclear explosion, gaskets on their way...
strapped down dip stick, hiding excess ring blow by...
clutch...
lol... anything else? But you've got a good carb now init
Better get spannering for RTOC, be good to see you there
Non Member
1552
Sun Sep 28, 2008 4:25 pm
si21 wrote:MFaulks wrote::lol: so let's total..
pressured water system, fix uprate end caps to hold a nuclear explosion, gaskets on their way...
strapped down dip stick, hiding excess ring blow by...
clutch...
lol... anything else? But you've got a good carb now init
Better get spannering for RTOC, be good to see you there
pressured water system, fix uprate end caps to hold a nuclear explosion, gaskets on their way...
WRONG gaskets already replaced, 3 core rad built on existing metal end caps on the rad!
Dip stick blowing out by blow by tut tut Mr Faulks the engine is running as clean as a whistle and no oil burning under full load as confirmed by the most reliable witness a man can have Mr Jonc
The clutch .....well the engine has never been taken out so I can't advise to it's condition apart from slippage, but I want to investigate the hydraulics first see whats going on there may be the master, I have had a little trouble before but it cleared once bled. I have some cheap .5 in there but Mr Dell has recommended some Castrol stuff that is of race quality but is rated .4, apparently it does not match .5 specs only because it has a dye in it.
Trust me Mr Faulks The car has come a long way ...TBH a fecking long way since I picked it up from Clee as a non runner about three years ago and its amazing what has had to be replaced. I found buying 2nd hand parts in this instance was neither economical with time or money as a lot of jobs such as starter and alternator were carried out a couple of times each ...it now has both brand new
I am sure I can get the car running reliably this year althouh I have an advance issue that needs to be checked out with some pinking. The timing has been checked witha strobe, but there may be a little play in the dizzy so may need to back it off slightly or find a third dizzy
Mr Faulks ....O YE Of little faith
Are you at Surrey Quays tonight If so see you later
Si21
Non Member
2094
Mon May 09, 2005 8:24 pm
S.E London
MFaulks wrote:si21 wrote:MFaulks wrote::lol: so let's total..
pressured water system, fix uprate end caps to hold a nuclear explosion, gaskets on their way...
strapped down dip stick, hiding excess ring blow by...
clutch...
lol... anything else? But you've got a good carb now init
Better get spannering for RTOC, be good to see you there
pressured water system, fix uprate end caps to hold a nuclear explosion, gaskets on their way...
WRONG gaskets already replaced, 3 core rad built on existing metal end caps on the rad!
Dip stick blowing out by blow by tut tut Mr Faulks the engine is running as clean as a whistle and no oil burning under full load as confirmed by the most reliable witness a man can have Mr Jonc
The clutch .....well the engine has never been taken out so I can't advise to it's condition apart from slippage, but I want to investigate the hydraulics first see whats going on there may be the master, I have had a little trouble before but it cleared once bled. I have some cheap .5 in there but Mr Dell has recommended some Castrol stuff that is of race quality but is rated .4, apparently it does not match .5 specs only because it has a dye in it.
Trust me Mr Faulks The car has come a long way ...TBH a fecking long way since I picked it up from Clee as a non runner about three years ago and its amazing what has had to be replaced. I found buying 2nd hand parts in this instance was neither economical with time or money as a lot of jobs such as starter and alternator were carried out a couple of times each ...it now has both brand new
I am sure I can get the car running reliably this year althouh I have an advance issue that needs to be checked out with some pinking. The timing has been checked witha strobe, but there may be a little play in the dizzy so may need to back it off slightly or find a third dizzy
Mr Faulks ....O YE Of little faith
Are you at Surrey Quays tonight If so see you later
Si21
Lol - pitty can't make it tonight, tax return... finding all the junk, but carrying on this conversation over a drink will definitely prove more interesting!
ah, so you have a localised reduction in gravity, or your dipstick just dislikes your oil that much? Oh I know, you have a localised vibration resonance, and out it pops... But then if you've backed your timing off that much it, all that nice oil will still be burning in your exhaust init - joke...
pinking, you sure that's not oil past your rings as well, did you bed them in nice and hard or take easy?
Winding you up mate, so it's just the dizzy to sort and you're good to go? Have you got those extractor headers on the car yet?
Non Member
2094
Mon May 09, 2005 8:24 pm
S.E London
clee wrote:Non members is about £80/90 ,7hrs open pit lane .
Non Member
2094
Mon May 09, 2005 8:24 pm
S.E London
clee wrote:I've just got in from stripping old Atmo shi.....pre-used classic car parts ......
Membership is £25 for the first year then £10 to renew but..................you must have been a member for a set amount of time to qualify for the discounted tracktime price which will be around £60 .
Users browsing this forum: No registered users and 205 guests