Paint job

Renault & Alpine General Discussion

Moderators: eastlmark, BIG_MVS, phildini, Test Moderator, Alpineandy

no avatar
User

StuartC

Rank

Non Member

Posts

44

Joined

Fri Jun 18, 2004 1:56 pm

Location

Stoke on Trent


Has thanked: 0 time
Been thanked: 0 time

Paint job

Postby StuartC » Mon Apr 25, 2005 11:23 am

Alas my black Gta is now suffering the age old problem of laquer peeling. I need to have the whole car done but also need the front end looking at as the nose cone doesn't seem to sit correctly. Anyone know of a firm that does a reasonable job at a fair price? If so, how much am I looking at.
User avatar
User

ben

Rank

Non Member

Posts

202

Joined

Mon Apr 19, 2004 12:43 pm

Location

Grantham


Has thanked: 0 time
Been thanked: 0 time

Postby ben » Mon Apr 25, 2005 11:51 am

If your talking about the where the nose cone meets the front wings at the top - they never fit properly. I sanded mine down as muck as i dared too when i painted it, but its still not perfect. From what i have heard there is always a mil or 2 difference between the front edge and the rear. :?
no avatar
User

StuartC

Rank

Non Member

Posts

44

Joined

Fri Jun 18, 2004 1:56 pm

Location

Stoke on Trent


Has thanked: 0 time
Been thanked: 0 time

Postby StuartC » Mon Apr 25, 2005 4:15 pm

No its not just that, it doesn't sit tight to the bumper either, its OK in the centre but seems to go upwards by about 6mm as it gets to the wings on both sides. Its never been pranged but was returned like that after I'd had the headlight glasses renewed. The garage tried several times to re-align it but reckon the nose cone had warped! Beats me.
User avatar
User

peterg

Rank

Non Member

Posts

2501

Joined

Wed Apr 14, 2004 10:26 pm

Location

Cumbria


Has thanked: 0 time
Been thanked: 0 time

Postby peterg » Mon Apr 25, 2005 4:19 pm

Fit and finish is crap on mine too....one front wing sits higher at the front than the other and that was even before I crashed it! I have been quoted £800 for a full spray, but that was using my father-in-law (well nearly!) and his connections to get a 'mates' type price. (no hes not mafia before anyone asks :D )Previous to that the same place were looking at around the £1000 mark. They are very good and know about fibreglass cars, but W. Cumbria is a long long way from Stoke on Trent!!!!
User avatar
User

simontaylor

Rank

Non Member

Posts

5602

Joined

Thu Apr 15, 2004 12:33 pm

Location

Fleet, Hampshire


Has thanked: 44 times
Been thanked: 56 times

Postby simontaylor » Mon Apr 25, 2005 5:19 pm

Try your local TVR dealer. They should be pretty well placed to recomend fibreglass body and paint experts.
1986 : '86 GTA v6 BW-EFR turbo, with Adaptronic ECU
Firsts at
2007 : Gurston Down & RAOC Champion
2008 : Rushmoor & Eelmoor & ACSMC Hillclimb class Champion
2009 : Longcross & Eelmoor
2010 : Crystal Palace & Eelmoor
2016 : Rushmoor & 5th O/A
no avatar
User

rupert

Rank

Non Member

Posts

1323

Joined

Mon Apr 19, 2004 7:39 pm

Location

Plymouth, Devon


Has thanked: 2 times
Been thanked: 9 times

Postby rupert » Mon Apr 25, 2005 5:44 pm

..... except it isn't fibreglass...... :shock:
User avatar
User

stephendell

Rank

Club Member

Club Member
Posts

7463

Joined

Wed Apr 14, 2004 7:25 pm

Location

London


Has thanked: 125 times
Been thanked: 102 times

Postby stephendell » Mon Apr 25, 2005 6:36 pm

The reason the front wings are often proud where they meet the nose is because the small bolt on plate that joins them together is missing 90% of the time if the car has had any repairs ie the nose cone or wings removed.

The reason is simple. It is an absolute B*****D to fit even if you have tiny hands. Hardly anyone ever refits them.

Fit these plates and the wings and nose should fit snuggly but be prepared for much frustration and multiple lacerations!!

I believe Tony Law's car was painted by a TVR specialist and they did a superb job. Although the GTA front and rear bumpers and wings are plastic, the rest of the car is polyester which is a pretty similar to TVR (although they use hand laid glass fibre)


  • Advertisement

Who is online

Users browsing this forum: No registered users and 208 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France