GTA Turbo 501 Rear Hub Bearing replacement.

Does anyone know an alternate supplier of these bearings, or do I have to pay for Renault replacements.
Any tips on doing it or JUST DON'T unless you have to !!

Does anyone know an alternate supplier of these bearings, or do I have to pay for Renault replacements.
Any tips on doing it or JUST DON'T unless you have to !!

buy from the club .....Mr D has a supply and they're probably half the renault price and OEM quality

if he can't supply i have some in stock

Make sure the hub nut is TIGHT before condeming the bearing.

Make sure the hub nut is TIGHT before condeming the bearing.

true check the nut hasn't just come loose, but if it's been running loose for any considerble time it's possibley knacked..... tighten it up give it a run and see

The rear bearing has a different part no. to the front, but the only difference is the temp rating of the seal. R25 or Fuego ones will fit and work fine at both ends of the GTA Turbo. Remember though to grease the bearing, and not only rely on the protective grease the bearing comes with, like a friend of mine did. Not overly difficult to change.

Thanks for that info, I'll start by giving Mr D an e-mail.