Headlamp glass wanted

Its a long shot but anyone selling a right hand side headlamp glass?

Must have cracked mine on the way back from Le Mans

[stephendell]

New Only

same as original? How much please mr d?

[BIG_MVS]

I have sold my only decent 2nd hand one. I think new ones have gone up to £200 at the moment.

Stephen, with the factory selling off all its parts are these not going to be available/manufactured anymore?

If someone pulls their finger out we could get polycarb ones made and printed to look just like the OE ......and wishbone poly bushes ....

[BIG_MVS]

Like the photo gallery updates, due in 2013.........

...and trackrod ends ...need to talk to Mr Holt for them and the polycarb replica covers .

[stephendell]

If someone pulls their finger out we could get polycarb ones made and printed to look just like the OE

Already done. Still waiting on the sample. Plastic man is slower than me!

If someone pulls their finger out we could get polycarb ones made and printed to look just like the OE

Already done. Still waiting on the sample. Plastic man is slower than me!

he's not you just need to call him!

If someone pulls their finger out we could get polycarb ones made and printed to look just like the OE

if you have details of them i can look into making some polycarb/acrylic ones... printed and all...

i have access to laser cutting and screen printing facilities, so just need dimensions/profile etc or even a sample so i can reverse engineer... (i still haven't got my gta so cant check the part ) should be able to make them for much cheaper that the OEM...

Would a 3d model be of any use ? I've done one from an original but it will need checking for fit so need to proto it first .It has a couple of curves to it ,cant be flat and needs a rebate along one edge .
Could then send you some pics of the screen print requirements ??
But this may all be going over what has already been started as above ? Dunno ,it just needs doing

great, I wanted clear, just a slightly different look. Actually, was there a clear indicator as well?

I'm up for a set, and my money is waiting

if you have a 3D CAD model it will help definitely... you can email it to me on c_gondouin@hotmail.com and i'll have a look at it...

Any progress on this? I'd be interested in some cheapish polycarb ones