MOT - parts required

Club Members can advertise items here

Moderators: eastlmark, Test Moderator

no avatar
User

djdrever

Rank

Non Member

Posts

8

Joined

Sun Jan 21, 2007 4:48 pm


Has thanked: 0 time
Been thanked: 0 time

MOT - parts required

Postby djdrever » Wed Oct 28, 2009 4:14 pm

Hi there, would be most grateful if anyone can help - I'm trying to resurrect my GTA Turbo after almost a year in lock up. For the MOT I need (amongst other things and according to garage), an o/s rear shock absorber.

If anyone can direct me to such a part (or pair (might as well get both done at once?)) at a reasonable price, that would be great. I've seen adjustable replacements etc. etc. but would rather get a standard replacement if they can still be had.

Brakes need work too but garage is happy to refurbish where they can. Just for a laugh they contacted Renault and were quoted £800 for pads alone - I guess at that kind of price, they can always say that they can still supply parts, 'cos they're not going to shift any. I reckon I've seen upgraded pads for less than £100 (front and rear) on eBay, but I could be wrong.

Cheers, djd
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Postby clee » Wed Oct 28, 2009 4:20 pm

I have a pair on a breaker .
I will have a look and see what they are like tomorrow .
no avatar
User

MFaulks

Rank

Non Member

Posts

1552

Joined

Sun Sep 28, 2008 4:25 pm


Has thanked: 45 times
Been thanked: 26 times

Postby MFaulks » Wed Oct 28, 2009 6:58 pm

Hi Djd,

Are you planning on doing the work yourself? If you are looking for a thorough health check and near Clee above I would suggest letting him check your car over, he's very resourceful at getting parts at the right prices and rebuilding.
... A diamond is only a piece of coal that did well under pressure... PRV afflicted, may be I need to squeeze harder!!!!

https://www.facebook.com/maftecfaulks
no avatar
User

andy001

Rank

Non Member

Posts

972

Joined

Sat Jul 18, 2009 6:09 pm


Has thanked: 1 time
Been thanked: 3 times

Postby andy001 » Wed Oct 28, 2009 7:30 pm

hi mate, did all my brakes last year stops on a pin now.
std discs £80
std pads £30
new master cylinder £38
rear calipers reconed £180 :shock: but worth it came back like new.
discs from internet supplier everything else from large motor factor.
master cylinder is a bit of a pain to fit but the rest is straight forward.
no avatar
User

MFaulks

Rank

Non Member

Posts

1552

Joined

Sun Sep 28, 2008 4:25 pm


Has thanked: 45 times
Been thanked: 26 times

Postby MFaulks » Wed Oct 28, 2009 9:02 pm

Hi Andy, I've been recommenderd to chat to you about doing the body work on my project, will drop you a pm, not sure the extent of bodyshop project you take on?
This will have one of my project engines, but I don't get into the body mod, prep and respray stuff and will be a number of mods depending on the final intercooler arrangement etc
... A diamond is only a piece of coal that did well under pressure... PRV afflicted, may be I need to squeeze harder!!!!

https://www.facebook.com/maftecfaulks
no avatar
User

djdrever

Rank

Non Member

Posts

8

Joined

Sun Jan 21, 2007 4:48 pm


Has thanked: 0 time
Been thanked: 0 time

Postby djdrever » Thu Oct 29, 2009 11:38 am

Thanks folks for coming back to me - I think I've got the parts I need for the brakes under control now, and Clee, cheers for looking into the shocks for me, let me know how that goes?

I wish I were close enough to Clee to drop the car in for a thorough check-up. As nice as it is up here in Edinburgh, it does have its disadvantages - barely anyone has seen a GTA in recent years, let alone worked on one. It would be good to have a knowledge base here that I could go to for help in these situations - ach well, the forum members here have been great with remote help and advice.

Maybe I should just remortgage the house and buy a RenaultSport Megane or Twingo?

Cheer, DJD
no avatar
User

jamie

Rank

Non Member

Posts

55

Joined

Thu Apr 22, 2004 4:52 pm


Has thanked: 0 time
Been thanked: 0 time

Postby jamie » Thu Oct 29, 2009 5:02 pm

May be to late now but Lothian brakeways in Dalkeith will be able to sort your brake parts out at a good price
no avatar
User

MFaulks

Rank

Non Member

Posts

1552

Joined

Sun Sep 28, 2008 4:25 pm


Has thanked: 45 times
Been thanked: 26 times

Postby MFaulks » Thu Oct 29, 2009 10:42 pm

Nah, keep the faith, the excellent crew on this site should be able to help you cover everything. Big MVS drops by close to you with work, and sure will be there with breaker parts. I used to do the drive back and forth between Newhouse and London every weekend to get back home, and M1 drop off at Lee's was about 3hrs down the road so not bad at all. So if a southern softie can do it.. Lol
... A diamond is only a piece of coal that did well under pressure... PRV afflicted, may be I need to squeeze harder!!!!

https://www.facebook.com/maftecfaulks
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Postby clee » Sat Oct 31, 2009 11:24 am

Dampers are off and look OK .No leaks and the gators are A1.
Image
Best to leave assembled with springs as your guys can just bolt them on complete in half an hour :D
Drop a PM or give me a call if you're interested .


  • Advertisement

Who is online

Users browsing this forum: No registered users and 131 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France