Cams

Renault & Alpine General Discussion

Moderators: eastlmark, BIG_MVS, phildini, Test Moderator, Alpineandy

User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Cams

Postby clee » Fri Dec 05, 2008 8:16 pm

I sold a set to DG ages ago when I did my first ever engine build .I think they were from a 2.8l Espace .DG sold them on to someone on here ?
I can't remember but I did measure them but I can't find the figures ....But they had a lot of lift I think .
DG ??? The bod that bought them from him ??? I would like to have another look at them .
User avatar
User

Stunned Monkey

Rank

Non Member

Posts

1514

Joined

Tue Apr 12, 2005 12:24 am

Location

Nr Chippenham, Wiltshire


Has thanked: 0 time
Been thanked: 3 times

Postby Stunned Monkey » Fri Dec 05, 2008 9:02 pm

According to the yanks, the Volvo B280E has the highest lift solid-rocker cams of any production PRV (same power from a 2.8 as Renault pulled from a 3 litre).

There's a guy in the US who got a 3 litre turbo running very well using a set of these cams that I sold him. You'll find them in any 1984-90ish V6 Volvo 760

Excluding the crank case and sump, the engine looks pretty much identical to an Espace/25 lump
Last edited by Stunned Monkey on Sat Dec 06, 2008 9:55 am, edited 1 time in total.
Martin - PRV Tinkerererer
www.delorean.co.uk
no avatar
User

MFaulks

Rank

Non Member

Posts

1552

Joined

Sun Sep 28, 2008 4:25 pm


Has thanked: 45 times
Been thanked: 26 times

Postby MFaulks » Fri Dec 05, 2008 11:07 pm

The n/a 280E cam solid-rocker has the greatest lift and longest duration curve of all the std cams available. I have measured the lift curves, but depends what you want to do though really :D
... A diamond is only a piece of coal that did well under pressure... PRV afflicted, may be I need to squeeze harder!!!!

https://www.facebook.com/maftecfaulks
User avatar
User

Stunned Monkey

Rank

Non Member

Posts

1514

Joined

Tue Apr 12, 2005 12:24 am

Location

Nr Chippenham, Wiltshire


Has thanked: 0 time
Been thanked: 3 times

Postby Stunned Monkey » Sat Dec 06, 2008 9:55 am

Woops - had written B28E, meant B280E :oops:
Martin - PRV Tinkerererer
www.delorean.co.uk
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Postby clee » Sat Dec 06, 2008 10:33 am

I don't want to lose too much low down torque ,still keeping an eye on hill climbing but mostly for track use .The torque is already moving up the rev range with the bigger turbos ..
User avatar
User

Stunned Monkey

Rank

Non Member

Posts

1514

Joined

Tue Apr 12, 2005 12:24 am

Location

Nr Chippenham, Wiltshire


Has thanked: 0 time
Been thanked: 3 times

Postby Stunned Monkey » Sat Dec 06, 2008 10:37 am

Well IMO stick with what we know - that the Venturi 2849 is even more torquey, no much more powerful at top end. I don't know for sure that the cams are standard Z7U but the figures would certainly suggest that they are. I'm sure Paul C would be happy for you to have a crawl over his if you're near Dunstable
Martin - PRV Tinkerererer
www.delorean.co.uk
no avatar
User

MFaulks

Rank

Non Member

Posts

1552

Joined

Sun Sep 28, 2008 4:25 pm


Has thanked: 45 times
Been thanked: 26 times

Postby MFaulks » Sat Dec 06, 2008 12:39 pm

... considered swapping the box, to get higher final drive ratio to suit hill climb? Would need to plot torque curve and multiplication ratios to see if it would be worth it, might be cheaper than engine mods.
... A diamond is only a piece of coal that did well under pressure... PRV afflicted, may be I need to squeeze harder!!!!

https://www.facebook.com/maftecfaulks
User avatar
User

jon_viola

Rank

Non Member

Posts

1159

Joined

Sun Oct 22, 2006 8:45 pm

Location

Sussex


Has thanked: 4 times
Been thanked: 7 times

Postby jon_viola » Sat Dec 06, 2008 12:51 pm

You could always have mine- v short!!!
1989 GTA Turbo
2003 Mercedes E320 CDI Estate- A.K.A Badke Bus

www.badkequartet.co.uk
User avatar
User

Stunned Monkey

Rank

Non Member

Posts

1514

Joined

Tue Apr 12, 2005 12:24 am

Location

Nr Chippenham, Wiltshire


Has thanked: 0 time
Been thanked: 3 times

Postby Stunned Monkey » Sat Dec 06, 2008 1:03 pm

MFaulks wrote:... considered swapping the box, to get higher final drive ratio to suit hill climb? Would need to plot torque curve and multiplication ratios to see if it would be worth it, might be cheaper than engine mods.


Lee Metters has a 25t box he got from me.
Martin - PRV Tinkerererer
www.delorean.co.uk
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Postby clee » Sat Dec 06, 2008 4:16 pm

No thanks, not after changing the box .The odd hillclimb now and then .
Mind you when you get the boost sorted Jon it would be good to see how yours goes .


  • Advertisement

Who is online

Users browsing this forum: Bing [Bot] and 288 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France