steering rack £382 verses £60, too good to be true??

Club Members can advertise items here

Moderators: eastlmark, Test Moderator

no avatar
User

macdwell

Rank

Non Member

Posts

18

Joined

Fri Apr 16, 2004 4:23 pm

Location

wiltshire


Has thanked: 0 time
Been thanked: 0 time

steering rack £382 verses £60, too good to be true??

Postby macdwell » Mon May 24, 2004 10:29 pm

It's looking like I may need a new/reconditioned steering rack. The obvious route via Renault will cost £382+VAT. However as an experiment I tried ringing my local motor factors and asked for a Renault Feugo rack. They said a 1986 was the latest listing they had and quoted £60. This seems too cheap?! and the fact that my GTA V6 Atmo is 1989 (3 years later) is not a good sign. However I'm looking for any comments feedback that may give me confidence that a 1986 Renault Feugo rack at £60 is the real thing?.
cheers Paul
User avatar
User

darrenbiggs

Rank

Non Member

Posts

1499

Joined

Thu Apr 29, 2004 1:03 pm

Location

Horley - Nr Gatwick


Has thanked: 15 times
Been thanked: 39 times

steering rack

Postby darrenbiggs » Tue May 25, 2004 10:06 am

Some of the magazines published when the GTA was new referred to the rack as from a Fuego, however mine was rebuilt by Paul Sage and during my chats with him I was told that there is little in common between the two.

I think the track rod ends are actually off a Renault 21 but Paul is the man to ask on 0208 7666 480.
no avatar
User

macdwell

Rank

Non Member

Posts

18

Joined

Fri Apr 16, 2004 4:23 pm

Location

wiltshire


Has thanked: 0 time
Been thanked: 0 time

Postby macdwell » Tue Jun 08, 2004 6:09 pm

My research to date suggests that the core part of the rack is the same as a Fuego, however the arms are different, maybe from a R25 . So to get a complete new rack you would need to buy a Feugo rack and then some R25 arms and swap these over. What makes getting the arms tricky is that Renault do not list these separately from the complete rack assembly. So no part number no part!. Why is it you can get every single individual nut bolt & washer itemised on some areas of the car but on the steering rack its just one assembly??.

Has anyone managed to get these sub-assembly part numbers for the rack on a GTA?
cheers Paul
no avatar
User

Alan Moore

Rank

Non Member

Posts

251

Joined

Thu Jul 01, 2004 1:04 pm

Location

Brisbane Australia


Has thanked: 0 time
Been thanked: 4 times

Postby Alan Moore » Thu Nov 25, 2004 2:05 pm

Going through old threads to see what I can learn. I have just pulled out the rack on my GTA, to find that the rack boots were only Fuego ones, and that the bush on the passenger side of the rack is the same as an R16,15,12 etc. The parts book does not even list or show the bush.

Over here the boots were $12 ea, the bush kit $8. About 12 pounds in your money. The pinion depth is easily adjusted to make it all like new, just add some moly grease. All fairly cheap, although the rack is a little difficult to remove and refit.
GTA V6 Turbo
Renault 4CV 16TS Power
BMW 2002 Tii M3 Power
User avatar
User

BIG_MVS

Rank

Club Member

Club Member
Posts

5097

Joined

Wed Jun 30, 2004 9:12 am

Location

Sandbach


Has thanked: 38 times
Been thanked: 72 times

Postby BIG_MVS » Thu Nov 25, 2004 11:39 pm

I'm in the process of buying said kit at the moment, it's taking a while but Paul at Ren-Tek(very helpful chap) assures me I will have it soon.

What's the problem with your rack Paul? If it's just that you have play in the passenger side chances are it's just the bush like on mine.
no avatar
User

Tom

Rank

Non Member

Posts

31

Joined

Tue Jan 30, 2007 10:06 am

Location

Adelaide, Australia


Has thanked: 0 time
Been thanked: 0 time

Postby Tom » Tue May 20, 2008 12:03 pm

[quote="Alan Moore"]Going through old threads to see what I can learn. I have just pulled out the rack on my GTA, to find that the rack boots were only Fuego ones, and that the bush on the passenger side of the rack is the same as an R16,15,12 etc. The parts book does not even list or show the bush.

Over here the boots were $12 ea, the bush kit $8. About 12 pounds in your money. The pinion depth is easily adjusted to make it all like new, just add some moly grease. All fairly cheap, although the rack is a little difficult to remove and refit.


Hi Alan

My GTA has had an inspection and we found it to have worn rack ends (the bits that connect the tie rod ends to the rack. Is this what you were referring to as bushes in your post?

Can you confirm which Renaults each component of the steering gear comes from? Ie is it in fact a Fuego for the rack and an R25 for the rest?

Hopefully I can source the bits here in Adelaide.
no avatar
User

Alan Moore

Rank

Non Member

Posts

251

Joined

Thu Jul 01, 2004 1:04 pm

Location

Brisbane Australia


Has thanked: 0 time
Been thanked: 4 times

Postby Alan Moore » Wed May 21, 2008 12:10 pm

The rack boots from a Fuego fit fine. The bush I mentioned is in the LH end of the rack and is often called an anti rattle bush for an R16. The long rods that attach to the rack (tierods) have no specific part No. in the GTA Parts book, but look similar to R18, Fuego, R25.

I have rarely seen the ball on the end of the rack badly worn, but the bush I mentioned is often tired.

Perhaps if you measured the length of the tierods, and relayed this to Ken at Caravelle he may be able to tell you which one they are, if they are the same as a standard Renault.
GTA V6 Turbo
Renault 4CV 16TS Power
BMW 2002 Tii M3 Power


  • Advertisement

Who is online

Users browsing this forum: No registered users and 43 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France