Fuel Starvation? Fuel Filters? Atmo.....

What would be suitable to replace the front pump on a turbo

Yes, but Ive run two high pressure pumps on my car (Bosch at the front with push on fittings) and a Walbro at the back. Even better.

Do a search for cheap brand new Bosch pumps on eBay.

The A610 only runs one high pressure pump at the front, and nothing else.

I'll have a look ,thanks .
I have a bit of an issue since fitting the bigger turbo .Plenty of power but it is hesitating when floored .Pretty sure it's not the clutch slipping ,the 2nd gear launch is good It is only noticable when I really floor it ,normal driving it's fine .
I will plumb the rising rate reg in and see if that helps first .

Look at what Santa has found Anyone want to go halves

http://cgi.ebay.co.uk/Rolling-road-dyna ... dZViewItem

I'll have a look ,thanks .
I have a bit of an issue since fitting the bigger turbo .Plenty of power but it is hesitating when floored .Pretty sure it's not the clutch slipping ,the 2nd gear launch is good It is only noticable when I really floor it ,normal driving it's fine .
I will plumb the rising rate reg in and see if that helps first .

Look at what Santa has found Anyone want to go halves

http://cgi.ebay.co.uk/Rolling-road-dyna ... dZViewItem

Well on the original ECU it will be because you are running lean. Extra fuel pressure will compensate, Adaptronic and bigger injectors will sort it.

I'll have a look ,thanks .
I have a bit of an issue since fitting the bigger turbo .Plenty of power but it is hesitating when floored .Pretty sure it's not the clutch slipping ,the 2nd gear launch is good It is only noticable when I really floor it ,normal driving it's fine .
I will plumb the rising rate reg in and see if that helps first .

Look at what Santa has found Anyone want to go halves

http://cgi.ebay.co.uk/Rolling-road-dyna ... dZViewItem

lol, halves is still too much

I'm still trying to sort the Adapt
When it runs it runs fine .TBH I've not had time to do much with it of late .But the knowledge base is getting larger It's not the sensor .

I'm still trying to sort the Adapt
When it runs it runs fine .TBH I've not had time to do much with it of late .But the knowledge base is getting larger It's not the sensor .

Its not the sensor, its the signal strength Theres another route Ill tell you about.

I'm still trying to sort the Adapt
When it runs it runs fine .TBH I've not had time to do much with it of late .But the knowledge base is getting larger It's not the sensor .

Its not the sensor, its the signal strength Theres another route Ill tell you about.

I beg to differ,
I think it is even more elementary dear Watson!

I'm still trying to sort the Adapt
When it runs it runs fine .TBH I've not had time to do much with it of late .But the knowledge base is getting larger It's not the sensor .

Its not the sensor, its the signal strength Theres another route Ill tell you about.

I beg to differ,
I think it is even more elementary dear Watson!

No sh*t Sherlock

I'm still trying to sort the Adapt
When it runs it runs fine .TBH I've not had time to do much with it of late .But the knowledge base is getting larger It's not the sensor .

Its not the sensor, its the signal strength Theres another route Ill tell you about.

I beg to differ,
I think it is even more elementary dear Watson!

No sh*t Sherlock

WHAT THEN

If it's the strength then surely the 4 pot lumps would be having problems as well ?? They use the same sensor and flywheel style , only diff is the pattern .......................

David Gentelman wrote


Made nigh on 180bhp on an atmo.

You have got me thinking, How does changing fuel pump to, I assume, a greater fuel flow one, increase the bhp on an atmo? Or have I missread your quote somehow.

I'm still trying to sort the Adapt
When it runs it runs fine .TBH I've not had time to do much with it of late .But the knowledge base is getting larger It's not the sensor .

Its not the sensor, its the signal strength Theres another route Ill tell you about.

I beg to differ,
I think it is even more elementary dear Watson!

No sh*t Sherlock

WHAT THEN

If it's the strength then surely the 4 pot lumps would be having problems as well ?? They use the same sensor and flywheel style , only diff is the pattern .......................

Hmmmmmmmmmmmmmmm...... well now ....who'd have thought
12 times OK