R5T(1) Electrical diagram spreadsheet

Guys,

I've finally finished converting the MR221 electrical diagram to a spreadsheet (all 576 connections!), is there a place here i can upload it?

Some of the data might be incorrect, as the PDF's & book i have are of poor quality, but if you cross reference the sheet, you should get most of it out.
I've got a T2, so i cant afford to spend more time on what is T1 info

I'll be pulling out my loom this weekend, so i'll complete the spreadsheet for a T2 soon (ish).

The file should also be available at:
http://users.bigpond.net.au/nate/Electricals_R5T2.xls sometime soon..

Cheers...

Nate
Nice one, just to add to your 'picture' 5t2's had two different fuse/connection panels, the connectivity and fuses provided by both differ! what a suprise!
On 5t (1's) only one type of panel was used.

Cheers
Mark

[stephendell]

I've finally finished converting the MR221 electrical diagram to a spreadsheet (all 576 connections!), is there a place here i can upload it?

If you can email it to me, I'll upload it to the technical section. With credits of course!

mail@renaultalpine.co.uk

Nate
Nice one, just to add to your 'picture' 5t2's had two different fuse/connection panels, the connectivity and fuses provided by both differ! what a suprise!
On 5t (1's) only one type of panel was used.
Cheers
Mark

Should've known
Whats the visable difference? I'll have to make a note when i do the diagrams as to which they're based on.
What i'll probably also do is overlay the wiring loom sections on an image of the shell from above, so the locations can be found.

Cheers

Nate
I have a sample of each of the panels, I will 'dig' them out and photograph for you, although there will be a delay as I am just off on hols
Cheers
Mark

Is there any one willing (or brave enough) to translate the GTA electrical manual into a readable exel format. There will be more than 1 beer in it for you.

Provide me an Alpine & i will

and Alan you're more than welcome to visit, but that doesnt mean you can leave your car here for a few days for me to go through