What are these wheels?

Given that the DeLorean shares its offsets with early Esprits and Alpines, I'm guessing they must be Alpine...... anyone ?

perhaps from an american market Renault/GM?
they look a bit merc like too.

There almost identical to a wheel Zender used to supply in the late 80's early 90's, Ronal also do a similar style the R10's.

So an aftermarket Alpine wheel then?

possibly Zender...... and the car is on german plates

So an aftermarket Alpine wheel then?

Why does it have to be Alpine?, they could be any wheel with a 4x100 stud pattern...

The offset on a DeLorean is shared with an A310, GTA and early Esprit, and it's not altogether comon on the rear.

The offset on a DeLorean is shared with an A310, GTA and early Esprit, and it's not altogether comon on the rear.

.....know what you mean...... know one makes a rear wheel for a spider that won't fit without an adapter of some sort

The offset on a DeLorean is shared with an A310, GTA and early Esprit, and it's not altogether comon on the rear.

They may have spacers on those wheels in the pic.

The offset on a DeLorean is shared with an A310, GTA and early Esprit, and it's not altogether comon on the rear.

.....know what you mean...... know one makes a rear wheel for a spider that won't fit without an adapter of some sort

Yes they do, you need to run Ferrari 308/328 fitment wheels. They have the same stud pattern and low offset. When I had the 18" Kahns on the rear of my A610, I selected a Ferrari fittment. (but to be honest they were one of the few brands that did it.)

The offset on a DeLorean is shared with an A310, GTA and early Esprit, and it's not altogether comon on the rear.

.....know what you mean...... know one makes a rear wheel for a spider that won't fit without an adapter of some sort

Yes they do, you need to run Ferrari 308/328 fitment wheels. They have the same stud pattern and low offset. When I had the 18" Kahns on the rear of my A610, I selected a Ferrari fittment. (but to be honest they were one of the few brands that did it.)

without an adapter...... and the same size centre bore???

I just said they are the same offset, yes..no spacers

The centre bore is larger on the Fez, so it uses a spigot ring to bring it down to Renault 60.1

they used to have center caps just like those?

just an idea

si21

I just said they are the same offset, yes..no spacers

The centre bore is larger on the Fez, so it uses a spigot ring to bring it down to Renault 60.1

so....... no they don't fir without adapter...... and the pcd isn't exactly the same either........ so as i said before....... no one makes wheels that will fit a spider without adapters..........

Do you know what a spigot ring is? Its not an 'adaptor'...

99% of aftermarket wheels use an oversize centre bore with spigot rings for each car, otherwise they would have to make tens of different wheel castings for wheels with the same stud patterns..

And the PCD is 5x108, same as the Renault.