Water Pump

Club Members can advertise items here

Moderators: eastlmark, Test Moderator

User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Water Pump

Postby clee » Thu Nov 16, 2006 5:02 pm

Will this fit :?: Looks the same 'cept for the sensor on the right .................
http://cgi.ebay.co.uk/Renault-Espace-V6 ... dZViewItem
User avatar
User

David Gentleman

Rank

Non Member

Posts

3474

Joined

Thu Apr 15, 2004 8:10 am

Location

Colchester, Essex


Has thanked: 0 time
Been thanked: 0 time

Postby David Gentleman » Thu Nov 16, 2006 5:08 pm

Thats not a sensor, its a pipe that goes of at a right angle to the back..

Don't know if it is threaded (and the same as the thread for the GTA sensor, as that is a metric fine thread..)
Image
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Postby clee » Thu Nov 16, 2006 5:31 pm

Looks about the right diameter as the sensor thread and should be tapped ,don't think Ren would change thread types ,that'd just be silly :lol: :lol: I might offer him a couple of quid ....................
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Postby clee » Fri Nov 17, 2006 8:59 am

That'll teach me to advertise :lol: :lol: Who's Bleepoo ?? :x :wink:
User avatar
User

simontaylor

Rank

Non Member

Posts

5602

Joined

Thu Apr 15, 2004 12:33 pm

Location

Fleet, Hampshire


Has thanked: 44 times
Been thanked: 56 times

Postby simontaylor » Fri Nov 17, 2006 9:08 am

Some bloke that keeps bidding against me too.
I'll give him "bleep", the big "poo".
1986 : '86 GTA v6 BW-EFR turbo, with Adaptronic ECU
Firsts at
2007 : Gurston Down & RAOC Champion
2008 : Rushmoor & Eelmoor & ACSMC Hillclimb class Champion
2009 : Longcross & Eelmoor
2010 : Crystal Palace & Eelmoor
2016 : Rushmoor & 5th O/A
User avatar
User

Stunned Monkey

Rank

Non Member

Posts

1514

Joined

Tue Apr 12, 2005 12:24 am

Location

Nr Chippenham, Wiltshire


Has thanked: 0 time
Been thanked: 3 times

Postby Stunned Monkey » Fri Nov 17, 2006 12:38 pm

Has anyone ever tooled up to make bolt-on pulleys for the GTA''s? The pumps are available for as little as £35 from Volvo (1985 Volvo 760) the only differencce being they used a 4-bolt pulley. This means that in the future, the pump is a doddle to replace. There've been bolt on pulleys available for the DeLorean for years to take advantage of the cross reference at a fraction of the price. Ours are single V-belt though.

http://tinyurl.com/ymub53
Martin - PRV Tinkerererer
www.delorean.co.uk
User avatar
User

simonsays74

Rank

Non Member

Posts

1296

Joined

Thu Apr 15, 2004 10:12 pm

Location

Belfast (££££ Zone!!)


Has thanked: 0 time
Been thanked: 0 time

Postby simonsays74 » Fri Nov 17, 2006 7:35 pm

bleepoo is alan wilson from this site, he seems to be buying in circles round him! :lol:

bit slippy though, you only ever see him cruising the site but never posting! :roll:
no avatar
User

Daniel S

Rank

Non Member

Posts

11

Joined

Sun Dec 17, 2006 2:45 pm


Has thanked: 0 time
Been thanked: 0 time

Postby Daniel S » Mon Dec 18, 2006 7:39 pm

Hi,
just a quick info on the waterpumps:

We tried to fit a R25 V6T waterpump (should be the same as the Alpine's) to a Renault 25 V6 with the Z7W 2.9L evenfire engine. The setup is identical to the one in the Espace 2.9L...

The Turbo pump does not fit! Or better said: Of course it fits mechanically. The problem is the temp-senor on the Turbo engines that has a thread. In contrast, the tubing bit on the Z7W engine (as the one on ebay) is just pressed in- no thread.

Changing the pump on the Z7W engine is really a pain in the neck... You have to allign those two hoses at the rear of the pump plus a third connecting to the tubing bit which connects to a metal non-flexible metal tube under the inlet manifold..

So as always :D - working on the turbo engine is simpler :)

Daniel
User avatar
User

David Gentleman

Rank

Non Member

Posts

3474

Joined

Thu Apr 15, 2004 8:10 am

Location

Colchester, Essex


Has thanked: 0 time
Been thanked: 0 time

Postby David Gentleman » Tue Dec 19, 2006 11:28 am

clee wrote:Looks about the right diameter as the sensor thread and should be tapped ,don't think Ren would change thread types ,that'd just be silly :lol: :lol: I might offer him a couple of quid ....................


Told ya... :lol: :wink:
Image
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Postby clee » Tue Dec 19, 2006 5:33 pm

David Gentleman wrote:
clee wrote:Looks about the right diameter as the sensor thread and should be tapped ,don't think Ren would change thread types ,that'd just be silly :lol: :lol: I might offer him a couple of quid ....................


Told ya... :lol: :wink:



Ok ,Ok ,OK :!:
Bloody know/guess it all :roll: :lol:
I've got one off the Baccara lump myself :oops:
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Postby clee » Tue Jan 09, 2007 5:58 pm

The Volvo pump has a smaller thread on the right hand sensor ,it's smaller so may tap out to suit the Ren sensor ..........................
no avatar
User

rupert

Rank

Non Member

Posts

1323

Joined

Mon Apr 19, 2004 7:39 pm

Location

Plymouth, Devon


Has thanked: 2 times
Been thanked: 9 times

Postby rupert » Sun May 04, 2008 9:22 am

Ah, mine has just started to leak a little.

http://cgi.ebay.co.uk/Renault-Espace-2-1TD-2-9-V6-Water-Pump-NEW_W0QQitemZ320247353703QQihZ011QQcategoryZ10410QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Is this one any good, or should I head off to the local Renault dealer?
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Postby clee » Sun May 04, 2008 10:11 am

No ,not even close .
More like this ...........
http://cgi.ebay.co.uk/RENAULT-LAGUNA-ES ... dZViewItem
But the ECU water temp sensor hole is not correct for the GTA .I'm bidding on this though as I'm putting a different sensor in to work with the Adaptronic so hands OFF :!: :!: :wink:
User avatar
User

BIG_MVS

Rank

Club Member

Club Member
Posts

5097

Joined

Wed Jun 30, 2004 9:12 am

Location

Sandbach


Has thanked: 38 times
Been thanked: 72 times

Postby BIG_MVS » Sun May 04, 2008 12:17 pm

Rupert,

I found this one when mine went (got one from darrenbriggs in the end).

Should be the correct one, if it's not at least you send send it back, unlike ebay one :cry:

https://sslrelay.com/buypartsby.co.uk/w ... ordID=4442
1994 A610 - Montana Red (For Sale)
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Postby clee » Mon May 05, 2008 5:56 pm

Next


  • Advertisement

Who is online

Users browsing this forum: Google [Bot] and 166 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France