ECU

Renault & Alpine General Discussion

Moderators: eastlmark, BIG_MVS, phildini, Test Moderator, Alpineandy

User avatar
User

mitchella

Rank

Non Member

Posts

302

Joined

Sat Apr 24, 2004 12:23 am

Location

Penicuik, Scotland


Has thanked: 0 time
Been thanked: 0 time

ECU

Postby mitchella » Sun Dec 10, 2006 11:48 pm

Just smoked my Renix unit investigating why it would not hold idle. Turned out the wires going to the idle speed control valve were bare under the rubber cover and when I wiggled them, I shorted the beggars out without realising. It held idle (just) for a minute or so before shooting up to 2000+rpm. It was only when I went to shut to engine off that I noticed that the cabin was full of that horrible smoke that only burning electronics produces.

Fixed the wires and started her up - runs OK - but still idles at 2000 rpm - doh!!!!!

Anyhow - got the box off and dismantled it and found the culprit - strangely enough a little IC that drives the ISCV outputs was melted. Cleaned off the soot and the rest looks OK. I have the bit out but its too badly damaged to get a part number off. Any of you hoarders got an old/spare unit handy and could tell me the part number? Its one of the ICs that is attached to the large heatsink in the corner, under the 35-way plug. Its the one that has 11 terminals coming out of it - all the others have 2 or 3. The ID number might be under the clip - these come off and go back on fairly easily although they are bit gummed up with varnish.

As an alternative, anyone got a dud unit that they are willing to part with so that I could get the part out off (assuming its not in the same state as mine).

Third alternative is - anyone got a working unit for a turbo that they are willing to sell.
User avatar
User

Stunned Monkey

Rank

Non Member

Posts

1514

Joined

Tue Apr 12, 2005 12:24 am

Location

Nr Chippenham, Wiltshire


Has thanked: 0 time
Been thanked: 3 times

Postby Stunned Monkey » Mon Dec 11, 2006 12:06 am

4th option for you: The DeLorean uses the same valve and has a standalone idle control ecu. You'd have a bit of wiring to do and you have to install a temp sensor in the engine's coolant somewhere but it works perfectly on the TT DeLorean. All parts available from www.delorean.com (NOT me)
Martin - PRV Tinkerererer
www.delorean.co.uk
User avatar
User

David Gentleman

Rank

Non Member

Posts

3474

Joined

Thu Apr 15, 2004 8:10 am

Location

Colchester, Essex


Has thanked: 0 time
Been thanked: 0 time

Re: ECU

Postby David Gentleman » Mon Dec 11, 2006 12:29 am

mitchella wrote:Just smoked my Renix unit investigating why it would not hold idle. Turned out the wires going to the idle speed control valve were bare under the rubber cover and when I wiggled them, I shorted the beggars out without realising. It held idle (just) for a minute or so before shooting up to 2000+rpm. It was only when I went to shut to engine off that I noticed that the cabin was full of that horrible smoke that only burning electronics produces.

Fixed the wires and started her up - runs OK - but still idles at 2000 rpm - doh!!!!!

Anyhow - got the box off and dismantled it and found the culprit - strangely enough a little IC that drives the ISCV outputs was melted. Cleaned off the soot and the rest looks OK. I have the bit out but its too badly damaged to get a part number off. Any of you hoarders got an old/spare unit handy and could tell me the part number? Its one of the ICs that is attached to the large heatsink in the corner, under the 35-way plug. Its the one that has 11 terminals coming out of it - all the others have 2 or 3. The ID number might be under the clip - these come off and go back on fairly easily although they are bit gummed up with varnish.

As an alternative, anyone got a dud unit that they are willing to part with so that I could get the part out off (assuming its not in the same state as mine).

Third alternative is - anyone got a working unit for a turbo that they are willing to sell.


Yep, £50. :)
Image
User avatar
User

David Gentleman

Rank

Non Member

Posts

3474

Joined

Thu Apr 15, 2004 8:10 am

Location

Colchester, Essex


Has thanked: 0 time
Been thanked: 0 time

Postby David Gentleman » Mon Dec 11, 2006 12:30 am

btw, thats £50 just for the first 'option'... :lol:






















Only joking.. 8)
Image
User avatar
User

mitchella

Rank

Non Member

Posts

302

Joined

Sat Apr 24, 2004 12:23 am

Location

Penicuik, Scotland


Has thanked: 0 time
Been thanked: 0 time

Postby mitchella » Mon Dec 11, 2006 11:31 am

So - is that £50 for a working unit then? Thats a very fair deal £40, I'd never have found on elsewhere for £30, I'll make full payment for £20 right now if you can despatch today.
User avatar
User

David Gentleman

Rank

Non Member

Posts

3474

Joined

Thu Apr 15, 2004 8:10 am

Location

Colchester, Essex


Has thanked: 0 time
Been thanked: 0 time

Postby David Gentleman » Mon Dec 11, 2006 11:53 am

mitchella wrote:So - is that £50 for a working unit then? Thats a very fair deal £40, I'd never have found on elsewhere for £30, I'll make full payment for £20 right now if you can despatch today.


£10 says your joking...
Image
User avatar
User

mitchella

Rank

Non Member

Posts

302

Joined

Sat Apr 24, 2004 12:23 am

Location

Penicuik, Scotland


Has thanked: 0 time
Been thanked: 0 time

Postby mitchella » Mon Dec 11, 2006 12:45 pm

£10 it is then and I already owe you that - so we must be quits now??? :lol: :lol:
User avatar
User

pgoldsmith

Rank

Non Member

Posts

994

Joined

Tue Jul 20, 2004 12:14 pm

Location

West Moors, Dorset


Has thanked: 3 times
Been thanked: 10 times

Postby pgoldsmith » Thu Dec 14, 2006 2:03 pm

I have one which is collecting dust.
Took it off when I had problems with the engine cutting out. I replaced it with a new one but it didnt solve the problem.
It turned out to be the flywheel sensor instead. :(
User avatar
User

mitchella

Rank

Non Member

Posts

302

Joined

Sat Apr 24, 2004 12:23 am

Location

Penicuik, Scotland


Has thanked: 0 time
Been thanked: 0 time

Postby mitchella » Thu Dec 14, 2006 2:12 pm

Thanks Paul

David has sorted me out with one. Needless to say I'll take a bit more care when wiggling wires in future


  • Advertisement

Who is online

Users browsing this forum: No registered users and 197 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France