Just won the Lottery !!!!!

Well it felt like I had

How's it go ?
If it weren't for back luck ,I'd have no luck at all ...................... da dedede dump



http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... %3AIT&rd=1

[Alpineandy]

I was going to ask what you'll do with your £10 but now I see you don't mean it that way. Hasn't DG or Tony Smith got an engine for sale.?

so who is the a110 bidder that hoping to get a V6 into the back of his motor?

so who is the a110 bidder that hoping to get a V6 into the back of his motor?

Dunno, but it's an Espace lump like wot I as got .Z7W is injection

I was going to ask what you'll do with your £10 but now I see you don't mean it that way. Hasn't DG or Tony Smith got an engine for sale.?

Not new with clutch they haven't Nearly wet myself when I saw that But no, too good to be true

... I wonder if he'd have got a few more bids if he spelt renault correctly

... I wonder if he'd have got a few more bids if he spelt renault correctly

I was going to tell him that Ohh yes and give Peter the heads up as well

I could convert to an atmo!!!!! Its very cheap too!!! OR......I could add my turbo to this....presumably as it hasnt been done before there is some huge difficulty with doing it (compression, oddfiriness??? )

I could convert to an atmo!!!!! Its very cheap too!!! OR......I could add my turbo to this....presumably as it hasnt been done before there is some huge difficulty with doing it (compression, oddfiriness??? )

Nah ....piece of "wee wee" Pete .You can have my eSpace lump for a monkey

I could convert to an atmo!!!!! Its very cheap too!!! OR......I could add my turbo to this....presumably as it hasnt been done before there is some huge difficulty with doing it (compression, oddfiriness??? )

Compression, you can't fit the turbo inlet manifold to it, it has a larger, low pressure oil pump on it which isn't recommended to be used...and etcetera...

[Alpineandy]

so who is the a110 bidder that hoping to get a V6 into the back of his motor?

Any Ideas how I can get it into the back of my A110 ?

.... transversly I should think.........

I could convert to an atmo!!!!! Its very cheap too!!! OR......I could add my turbo to this....presumably as it hasnt been done before there is some huge difficulty with doing it (compression, oddfiriness??? )

Compression, you can't fit the turbo inlet manifold to it, it has a larger, low pressure oil pump on it which isn't recommended to be used...and etcetera...

Academic now I've started stripping the 25 lump as a learning exercise .What bits should I be carefull with in case they are of use for the Turbo rebuild ? Block ,cams ,conrods ??? the crank ????

I could convert to an atmo!!!!! Its very cheap too!!! OR......I could add my turbo to this....presumably as it hasnt been done before there is some huge difficulty with doing it (compression, oddfiriness??? )

Compression, you can't fit the turbo inlet manifold to it, it has a larger, low pressure oil pump on it which isn't recommended to be used...and etcetera...

What bits should I be carefull with in case they are of use for the Turbo rebuild ? Block ,cams ,conrods ??? the crank ????

?, what are you taking the bits out with, a JCB?

Keep it all...Im sure you can be careful with the lot...there's nothing of use in there for the turbo V6 unless the rods and block are mullered..

Do you mind I is an enginear innit well in theory ............Birmingham spanner and chisel .
I might need the block But in any case I can get it anodized