Moderators: eastlmark, Test Moderator
Non Member
725
Thu Apr 14, 2005 9:06 am
Hampshire
Non Member
10431
Fri May 28, 2004 11:58 am
Derbyshire
Miles wrote:Wanted the medium diameter hose with protective shrink wrap on, This is situated next to Turbo heat shield passes by top turbo oil supply pipe, goes to the cylindrical thing (left hand rocker cover) then via another medium sized pipe to the LHS intercooler Plenum. Mine is hissing, I am assuming its leaking and not the norm.(':(') P.S the correct name for the pipe and cylindrical thing would be handy.
Non Member
5602
Thu Apr 15, 2004 12:33 pm
Fleet, Hampshire
Non Member
2501
Wed Apr 14, 2004 10:26 pm
Cumbria
Club Member
2381
Mon Jun 14, 2004 8:37 am
North Essex
peterg wrote:Happened to me when mine popped off on the Isle of Man this year...doing about 70 round a bend on a sprint!!!! .
peterg wrote: Any old pipe will do....its just a vacuum hose.
Non Member
2501
Wed Apr 14, 2004 10:26 pm
Cumbria
Non Member
725
Thu Apr 14, 2005 9:06 am
Hampshire
Non Member
725
Thu Apr 14, 2005 9:06 am
Hampshire
Non Member
1296
Thu Apr 15, 2004 10:12 pm
Belfast (££££ Zone!!)
peterg wrote:When I said any old piece of pipe....I think you'll find any pipe that diameter will have thick enough walls to hold the vacuum.
Non Member
1514
Tue Apr 12, 2005 12:24 am
Nr Chippenham, Wiltshire
peterg wrote:Thats a bad hose to go.....if you loose all pressure your throttle will stay fully open and you will have no servo on the brakes... <snip>.
Non Member
2501
Wed Apr 14, 2004 10:26 pm
Cumbria
Not *quite*.... This is the throttle bypass with active valve to control idlespeed. However the 'ole is certainly big enough to have the effect of a partially open throttle (actually when you floor the throttle, the idlespeed system *should* open the valve all the way providing extra air). The brake servo should have a non-return valve so it will allow you to stop at least once if this happens (if it didn't have a non-return valve, left-foot braking would be a bit of a challenge when under boost!
Non Member
3709
Mon Apr 18, 2005 7:11 am
Alpine France
simonsays74 wrote:peterg wrote:When I said any old piece of pipe....I think you'll find any pipe that diameter will have thick enough walls to hold the vacuum.
i rest my case again.
when will people learn to leave their cars to people who are trained and know what they are talking about and doing?
drives me mad!
please do not wait until someone has a crash................
Non Member
725
Thu Apr 14, 2005 9:06 am
Hampshire
Non Member
725
Thu Apr 14, 2005 9:06 am
Hampshire
Users browsing this forum: Bing [Bot] and 141 guests