clutch

wheres the best place/cheapest to buy a clutch master cylinder from as mine has been leaking into the footwell

Renault No really ,not messin about .
£60.09

cheers i will get one ordered tomoz

tried Renault for a 610 clutch kit £475 ouch!! anywhere else sell them?

i would of thought you could get an uprated one for less than that

I've been looking into that and it would seem you can are Renault trying to drive us off the road

tried Renault for a 610 clutch kit £475 ouch!! anywhere else sell them?

Only the cover on the A610 is different to the GTA (stiffer), the friction plate and bearing are the same parts, so if your cover is still in good condition with no damage, you can just buy and normal GTA plate and bearing.

i would of thought you could get an uprated one for less than that

Just been talking to AP this afternoon...

The clutch I am now going for is a full uprated 3 part system (240mm diameter 6 paddle cerametallic plate and 280mm cover and new bull nose bearing and this will cope with upto 600lb of torque, as used on the GT40 replicas, and even that is just under £400.

The only problem is it will require the flywheel redrilling and reskimming for the new cover and larger plate, but this is fairly straightforward.

The standard GTA clutch can cope with around 260lb/ft, the 610 around 280 (due to the slightly stiffer cover), but then it all depends how you drive it..

Renault No really ,not messin about .
£60.09

Just telephoned Renault york £111.32 + VAT havnt orderd it yet, any ideas

Renault No really ,not messin about .
£60.09

Just telephoned Renault york £111.32 + VAT havnt orderd it yet, any ideas

Bought mine in Sept last year so not that long ago

[Alpineandy]

As I don't own anything with a UN1 Gearbox (unless they're fitted on a 21 GTX...), forgive me if this is a stupid question.

As the box is used by the 21 turbo, wouldn't an up-rated 21turbo clutch fit/work?

As I don't own anything with a UN1 Gearbox (unless they're fitted on a 21 GTX...), forgive me if this is a stupid question.

As the box is used by the 21 turbo, wouldn't an up-rated 21turbo clutch fit/work?

The box is the same yes, but the flywheel and plate is different, and an uprated one of those is still only good for 300bhp max.

Hence the need to go custom..

[Alpineandy]

an uprated one of those is still only good for 300bhp max. Hence the need to go custom..

So when a 21T guy says he has 325bhp I can ask him if he has a custom clutch and if he says 'no' he's a liar (about the bhp) !!

an uprated one of those is still only good for 300bhp max. Hence the need to go custom..

So when a 21T guy says he has 325bhp I can ask him if he has a custom clutch and if he says 'no' he's a liar (about the bhp) !!

well that depends....he might have 325bhp at the flywheel, just unfortunately it doesnt make it to the wheels because it slips..

[Alpineandy]

The clutch I am now going for is a full uprated 3 part system (240mm diameter 6 paddle cerametallic plate and 280mm cover and new bull nose bearing and this will cope with upto 600lb of torque, as used on the GT40 replicas, and even that is just under £400.

Am I correct guessing that it should last forever on cars with 350bhp?

What type of discount would you get for bulk if a few more GTA turbo drivers wanted one as well?