GTA Erratic Speedometer

Renault & Alpine General Discussion
no avatar
User

108002917

Rank

Non Member

Posts

73

Joined

Mon Dec 27, 2004 4:10 pm

Location

Pontypridd South Wales


Has thanked: 0 time
Been thanked: 0 time

Postby 108002917 » Mon Dec 05, 2005 11:41 pm

I have started to look at the connections from the speed sensor end. The connections on the plug on the inner wing look reasonable and do not appear to be corroded. I have cleaned them switch cleaner and put them back together. I then examined the speed sensor itself !!! How do you remove the sensor from the gearbox? I removed the retaining clamp and tried to pull it out but it seems solid!!!
Does anyone know the easiest way to remove it?

Also when I looked at the sensor, there appeared to be a small ferrule which seemed to have come loose from the sensor and was loose on the cable. When I fealt the wire coming out from the sensor the cable covering didn't feel complete and I am wondering whether the ferrule which I think has come loose from the sensor is allowing the cables to flex too much - Anyone out there with any knowledge if this ferrule should be attached to the sensor???

I have pushed it back into the sensor and the speedo was working OK, only to cut out momentarily again !!!

I want to work methodically through the system - if this is possible!!! The instrument panel connectors will be next.

Any more comments will be most welcome. :(
Previous


  • Advertisement

Who is online

Users browsing this forum: No registered users and 151 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France