Moderators: eastlmark, BIG_MVS, phildini, Test Moderator, Alpineandy
Non Member
43
Wed Jul 10, 2019 2:03 am
Non Member
34
Thu Aug 02, 2018 10:58 am
Non Member
43
Wed Jul 10, 2019 2:03 am
Non Member
86
Thu May 30, 2019 3:26 pm
nyc863 wrote:my keyless entry never worked. Might be why I hate the key more than others.
hoping they can fix it on upcoming service.
Non Member
86
Thu May 30, 2019 3:26 pm
Non Member
43
Wed Jul 10, 2019 2:03 am
Non Member
86
Thu May 30, 2019 3:26 pm
Non Member
178
Wed Aug 23, 2017 6:47 pm
JonT wrote:The 12v socket at the back of the console? No, I found it couldn't. As you spotted, it only seems live with the ignition on. With the key not inside the car, it appears to auto switch off after about 10 minutes or so, and then stops charging. I posted earlier in this thread about how I fitted a charging connector to the battery and routed it to the screen wash filler flap so it's easy enough to connect a charger. The cable can feed out the top of the bonnet by the wipers.
viewtopic.php?f=2&t=9406&start=480#p99792
Non Member
86
Thu May 30, 2019 3:26 pm
bcr5784 wrote:JonT wrote:The 12v socket at the back of the console? No, I found it couldn't. As you spotted, it only seems live with the ignition on. With the key not inside the car, it appears to auto switch off after about 10 minutes or so, and then stops charging. I posted earlier in this thread about how I fitted a charging connector to the battery and routed it to the screen wash filler flap so it's easy enough to connect a charger. The cable can feed out the top of the bonnet by the wipers.
viewtopic.php?f=2&t=9406&start=480#p99792
I think the jury is still out on this one. In my Porsche it also switched off after a few minutes or so UNLESS it detected a charger (12v source plugged in). I understand the one that Alpine sell IS hardwired which does perhaps suggest that plugging a CTek into the 12 V socket perhaps doesn't work - but another owner is checking this today with his CTEK
Non Member
178
Wed Aug 23, 2017 6:47 pm
JonT wrote:[
I tried it with a CTEK and the Maypole, neither worked after 10 mins in the 12v socket.
Non Member
30
Tue Sep 08, 2020 3:04 pm
Non Member
32
Wed Feb 27, 2019 1:27 pm
Non Member
16
Fri May 20, 2016 8:09 pm
Non Member
32
Wed Feb 27, 2019 1:27 pm
Users browsing this forum: No registered users and 185 guests