Engine bits

I need to refill the GTA tuning piggy bank ................

I have a complete 25T Z7U all ancillaries attached and with UN1 ,a long block Z7U that was running fine ,we pulled it out Easter .It probably needs the stem seals doing .
I could strip the complete unit for bits if required .
I set of Z7U heads freshly skimmed 0.004" .They are still well within limits .
Two pairs of Turbo cams , 2 turbos ,one with 360 bearing both non water cooled .a Stunned styley modified flywheel .FSE rising rate reg .

Have a lot of little odds and sods as well .O rings ,exhaust gaskets etc ....
Let me know if you need anything and I'll have a look .PM or give me a bell .

07983 144595

so young ,yet so bitter ...................

[BIG_MVS]

Hi

I did enjoy reading this.... not as much crap as I have to get rid of, but to let you know 4 or 5 sets of heads net 60 quid down the metal merchant the other day, I was sooo pleased to see the back of them.

Just for those of you curious, this included 25 turbo heads, alpine turbo and n/a heads, and Volvo 280 heads ... hopefully there are on their way to china to make something more useful!

There you go Lee, fill de boot of the Mondeo before taking it to these boys

I've still got boost issues but everything else seems OK .Hope yours all comes together .Looking forward to seeing it run ........for however long

Take a screen grab .

Take a screen grab .

or "PRTSCN" Print Screen, often near the top right of keyboard.