Hi David
Your diagnostic unit and spare ECU are on the way back. Thanks.
Unfortunately I still have not resolved the problem and the car will not start due to no spark or injector pulse.
I ran the diagnostics and these are the readings:
ECU Code = 101.3
Battery = 12v
Engine Speed = 00
Coolant Temp = 4 degrees C
Inlet Air Temp = 0 degrees C
Throttle state = mid (Full worked OK) did not get idle but probably because flap was not fully closed.
MAP Sensor = 549 Mb
CO POT = 1.464 - 1.47v
Knock Sensor = 00 steps
Knock correction = 00 steps
Idle postion = 8.19%
The ECU was not talking (Postion sensor red and white leads round the wrong way) changed them and error cleared.
Only other fault was code 23 which said no engine RPM.
Any ideas as this is really becoming a pain!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
PS spare ECU didn't make any difference!!!!!!!!!!!!!!