Driveshafts.....and dealers

Renault & Alpine General Discussion
User avatar
User

mettersl

Rank

Club Member

Club Member
Posts

2027

Joined

Sat Nov 13, 2004 12:46 pm

Location

Saffron Walden- North Essex


Has thanked: 23 times
Been thanked: 59 times

Driveshafts.....and dealers

Postby mettersl » Thu Dec 13, 2007 8:24 pm

Does anyone know the current availability on GTA/A610 drive shafts?
Having just tried (yet another) Renault dealer, I have found the usual story that after two weeks its all too hard...."-have to fax france, too hard etc"

As I understand it LHS (the side I am after) is 250, the RHS 350 on the price list- but not in stock in the UK.

I have been told (and I'm not sure I believe it) that they are actually unavailable- despite the prices on the Renault system. This is a long way off the first time this has happened to me, but usually only after you chase them they remember the parts aren't available....

Does anyone have:-
1) A reliable Renault parts department that I could try (somewhere in East Anglia or the south east) or kow te current position?
2) Know anyone that can rebuild them? (Mine is only slightly loose and noisy under full load only)
3) Know if the ones Simon Auto's have on their list are OK?

Cheers
Lee
User avatar
User

Stunned Monkey

Rank

Non Member

Posts

1514

Joined

Tue Apr 12, 2005 12:24 am

Location

Nr Chippenham, Wiltshire


Has thanked: 0 time
Been thanked: 3 times

Postby Stunned Monkey » Thu Dec 13, 2007 9:02 pm

IMy lot are good but they are slaves to the computer system, but aren't worried about ordering from France. I frequently get stuff in with a 60 part number and get a trade discount. Drop me a pm or give me a ring on 07976 619759
Martin - PRV Tinkerererer
www.delorean.co.uk
User avatar
User

stephendell

Rank

Club Member

Club Member
Posts

7463

Joined

Wed Apr 14, 2004 7:25 pm

Location

London


Has thanked: 125 times
Been thanked: 102 times

Postby stephendell » Thu Dec 13, 2007 9:33 pm

The LHS 6001009053 is finished. You cannot buy this new from Renault.

RHS 6001009054 is available and I have one new unit that came from Simon Autos in stock. Alternatively I can pick you up a new one from the Alpine factory if you like next time I go over.

Also I was speaking to a chap at the London Motorsport Chap last weekend about having them re-made as bolt on units for ease of replacement.
User avatar
User

David Gentleman

Rank

Non Member

Posts

3474

Joined

Thu Apr 15, 2004 8:10 am

Location

Colchester, Essex


Has thanked: 0 time
Been thanked: 0 time

Postby David Gentleman » Thu Dec 13, 2007 9:48 pm

I have a pair of low mileage ABS ones, off an atmo too, even better.
Image
User avatar
User

andyh877

Rank

Non Member

Posts

3709

Joined

Mon Apr 18, 2005 7:11 am

Location

Alpine France


Has thanked: 1 time
Been thanked: 5 times

Postby andyh877 » Mon Dec 17, 2007 10:27 am

David Gentleman wrote:I have a pair of low mileage ABS ones, off an atmo too, even better.


low mileage :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
User avatar
User

David Gentleman

Rank

Non Member

Posts

3474

Joined

Thu Apr 15, 2004 8:10 am

Location

Colchester, Essex


Has thanked: 0 time
Been thanked: 0 time

Postby David Gentleman » Mon Dec 17, 2007 10:43 am

andyh877 wrote:
David Gentleman wrote:I have a pair of low mileage ABS ones, off an atmo too, even better.


low mileage :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:


..as apposed to 'medium' mileage or 'high' mileage :wink:
Image
User avatar
User

Stunned Monkey

Rank

Non Member

Posts

1514

Joined

Tue Apr 12, 2005 12:24 am

Location

Nr Chippenham, Wiltshire


Has thanked: 0 time
Been thanked: 3 times

Postby Stunned Monkey » Mon Dec 17, 2007 11:35 am

stephendell wrote:Also I was speaking to a chap at the London Motorsport Chap last weekend about having them re-made as bolt on units for ease of replacement.


bolt-on o/p flanges are readily available for the DeLorean. The CV joints are ball type but the shaft itself is removable and is very simple
Martin - PRV Tinkerererer
www.delorean.co.uk
no avatar
User

GTAlex82

Rank

Non Member

Posts

46

Joined

Sun Dec 31, 2006 9:00 pm


Has thanked: 0 time
Been thanked: 0 time

Postby GTAlex82 » Wed Dec 26, 2007 6:35 pm

This might sound contradictory but Ive had two and they were both fine... David fitted the first but a failed gearbox mount later put it out of balance; a second one ordered from Simon Autos arrived very promptly and was a breeze to fit, and seems ok. Hope that helps.
User avatar
User

mettersl

Rank

Club Member

Club Member
Posts

2027

Joined

Sat Nov 13, 2004 12:46 pm

Location

Saffron Walden- North Essex


Has thanked: 23 times
Been thanked: 59 times

Postby mettersl » Wed Apr 23, 2008 7:17 pm

Now I have a replacement drive shaft, I'd like to fit new boots to it.
Renault- certainly sir, that will be £40 for the pair. Gulp- OK
Until today- sorry sir, not available.
Has anyone had any luck using boots for other Renaults?? Are the joints from an Espace?
Is there a drive shaft supplier/overhaul company that anyone can recommend?
And whilst I'm here, is the oil pressure sender (the one for the gauge) shared with anything else?

Thanks
Lee
User avatar
User

David Gentleman

Rank

Non Member

Posts

3474

Joined

Thu Apr 15, 2004 8:10 am

Location

Colchester, Essex


Has thanked: 0 time
Been thanked: 0 time

Postby David Gentleman » Thu Apr 24, 2008 10:33 am

mettersl wrote:Now I have a replacement drive shaft, I'd like to fit new boots to it.
Renault- certainly sir, that will be £40 for the pair. Gulp- OK
Until today- sorry sir, not available.
Has anyone had any luck using boots for other Renaults?? Are the joints from an Espace?
Is there a drive shaft supplier/overhaul company that anyone can recommend?
And whilst I'm here, is the oil pressure sender (the one for the gauge) shared with anything else?

Thanks
Lee


No, Espace\25 ones are too big. Ok one end, not the other, as one end of the shaft runs very close to the subframe, and a bigger boot rubs on it.

Take the shaft to a motorfactor, and see if they have anything that might be of use.
Image
User avatar
User

David Gentleman

Rank

Non Member

Posts

3474

Joined

Thu Apr 15, 2004 8:10 am

Location

Colchester, Essex


Has thanked: 0 time
Been thanked: 0 time

Postby David Gentleman » Thu Apr 24, 2008 10:35 am

Lee, can you measure the shaft diameter of the 'A610' shaft for me?

Its always been said that they are meant to be thicker than the GTA ones, but when I had the my 610's and GTA's, I went round and measured them all and they were all identical.
Image
User avatar
User

stephendell

Rank

Club Member

Club Member
Posts

7463

Joined

Wed Apr 14, 2004 7:25 pm

Location

London


Has thanked: 125 times
Been thanked: 102 times

Postby stephendell » Thu Apr 24, 2008 11:23 am

27mm

I have just had this discussion with Paul Tindall. If they do turn out to be the same then I can get the late Le Mans shafts with ABS rings from the factory at a reasonable price. Only the RHS though.

Maybe Tony Law could measure his new Le Mans Shaft please for comparison.
Trafic, Twingo GT, Vel Satis Turbo x 2, Clio V6 Proto Ph2, Vel Satis 3.5, Avantime, Alpine A610, GTA Atmo x 3, GTA Turbo x 3, R5 Gordini Turbo Mid Engine, Alpine A310 4cyl, Alpine A110, Yellow Smart
User avatar
User

David Gentleman

Rank

Non Member

Posts

3474

Joined

Thu Apr 15, 2004 8:10 am

Location

Colchester, Essex


Has thanked: 0 time
Been thanked: 0 time

Postby David Gentleman » Thu Apr 24, 2008 11:39 am

stephendell wrote:27mm

I have just had this discussion with Paul Tindall. If they do turn out to be the same then I can get the late Le Mans shafts with ABS rings from the factory at a reasonable price. Only the RHS though.

Maybe Tony Law could measure his new Le Mans Shaft please for comparison.


Well I just went outside and measured a GTA one and its dead on.
Image
User avatar
User

David Gentleman

Rank

Non Member

Posts

3474

Joined

Thu Apr 15, 2004 8:10 am

Location

Colchester, Essex


Has thanked: 0 time
Been thanked: 0 time

Postby David Gentleman » Thu Apr 24, 2008 11:40 am

I still have 3 used ABS shafts here, a left and right pair and an odd one (can't recall which till I measure it)
Image
User avatar
User

mettersl

Rank

Club Member

Club Member
Posts

2027

Joined

Sat Nov 13, 2004 12:46 pm

Location

Saffron Walden- North Essex


Has thanked: 23 times
Been thanked: 59 times

Postby mettersl » Thu Apr 24, 2008 11:47 am

I'll go out and measure them tonight. I have a pair of GTA ABS ones and one spare A610 (LHS) one. I'll look at the cup sizes and the actual drive shaft diameter.
One complexity is I think Renault have been supplying A610 units for GTA as a substitution for a while.
As I don't know the history of the GTA shafts too well, if they are the same it might not be definitive.
As the 610 boots are unavailable and have a can attached I might just have to reuse the exiting ones. They are OK but I'd prefer some new rubber if its all out.
Next


  • Advertisement

Who is online

Users browsing this forum: No registered users and 180 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France