Apexi RSM, Would it work on a GTA?

Renault & Alpine General Discussion
User avatar
User

gt5

Rank

Non Member

Posts

594

Joined

Thu Nov 17, 2005 5:35 pm

Location

york


Has thanked: 0 time
Been thanked: 0 time

Apexi RSM, Would it work on a GTA?

Postby gt5 » Wed Oct 25, 2006 1:56 pm

Just out of interest would a Apexi RSM work on a GTA? Just a bit :? with the paragraph on the discription below . http://www.g-motorsports.com/rsm.htm

"The RSM can be fitted to any car with a electronic speed input wire running to the ECU, rather than the mechanical speedometer cable. There are 4 wires which require connecting to operate the RSM, the Power, Ground, RPM and Speed wires. RSM's have been fitted easily by customers themselves on Vauxhalls, Fords and other Euro cars"

Just thinking that it would match up with the Apexi boost controller i have :wink:
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Postby clee » Wed Oct 25, 2006 2:03 pm

I can't see why not ........
User avatar
User

andyh877

Rank

Non Member

Posts

3709

Joined

Mon Apr 18, 2005 7:11 am

Location

Alpine France


Has thanked: 1 time
Been thanked: 5 times

Postby andyh877 » Wed Oct 25, 2006 2:13 pm

if you really look at it and what it does functionally....... theres alot better on the market.....

try this for starters..... buy a proper data logger
much better

Image

we're plannning to use one of these on a spider.....it's a very nice piece of kit
Image
User avatar
User

David Gentleman

Rank

Non Member

Posts

3474

Joined

Thu Apr 15, 2004 8:10 am

Location

Colchester, Essex


Has thanked: 0 time
Been thanked: 0 time

Postby David Gentleman » Wed Oct 25, 2006 2:15 pm

Yes, but this may sound a bit thick, but what does it actually do? I can't see the point in it....
Image
User avatar
User

andyh877

Rank

Non Member

Posts

3709

Joined

Mon Apr 18, 2005 7:11 am

Location

Alpine France


Has thanked: 1 time
Been thanked: 5 times

Postby andyh877 » Wed Oct 25, 2006 2:16 pm

David Gentleman wrote:Yes, but this may sound a bit thick, but what does it actually do? I can't see the point in it....


i agree but didn't want to hurt his feelings...... :lol:
User avatar
User

peterg

Rank

Non Member

Posts

2501

Joined

Wed Apr 14, 2004 10:26 pm

Location

Cumbria


Has thanked: 0 time
Been thanked: 0 time

Postby peterg » Wed Oct 25, 2006 3:19 pm

Get a G-tech from E-bay for £40 and save £120....the only thing of any interest that it seems to do is measure acceleration. I suspect its aimed at people who go 'cruising' to look pretty next to their sat. nav. ,DVD player and neon lights :lol:
User avatar
User

gt5

Rank

Non Member

Posts

594

Joined

Thu Nov 17, 2005 5:35 pm

Location

york


Has thanked: 0 time
Been thanked: 0 time

Postby gt5 » Wed Oct 25, 2006 5:30 pm

Are you sure its a yes Dave? Just worried with the; "The RSM can be fitted to any car with a electronic speed input wire running to the ECU" :?

Re; the proper data loggers Andy, i agree much!!better then the RSM but all ime wanting is one of the apexi units to match up with the Apexi boost controller already fitted, suppose the ability to measure accelaration will be good :wink: and g force :wink:

Maybe a stack dash would be nice in the future, but will need to rob some banks 1st, nearly ready for Noble, the water inj is just about fitted, i just need some time off work to get it down there :roll: and hope things with GTA's dont happen in 3's meaning Peter, Lee, and Steve gt5:shock: :twisted:
User avatar
User

David Gentleman

Rank

Non Member

Posts

3474

Joined

Thu Apr 15, 2004 8:10 am

Location

Colchester, Essex


Has thanked: 0 time
Been thanked: 0 time

Postby David Gentleman » Wed Oct 25, 2006 5:40 pm

gt5 wrote:Are you sure its a yes Dave? Just worried with the; "The RSM can be fitted to any car with a electronic speed input wire running to the ECU" :?

Re; the proper data loggers Andy, i agree much!!better then the RSM but all ime wanting is one of the apexi units to match up with the Apexi boost controller already fitted, suppose the ability to measure accelaration will be good :wink: and g force :wink:

Maybe a stack dash would be nice in the future, but will need to rob some banks 1st, nearly ready for Noble, the water inj is just about fitted, i just need some time off work to get it down there :roll: and hope things with GTA's dont happen in 3's meaning Peter, Lee, and Steve gt5:shock: :twisted:


Ignore the bit where it says ecu, it means is the speedo drive electronic or mechanical. The RSM just wants a speed input which is fine on the GTA.

As for digi dashes, if you went for an Adaptronic, it has a add on box available which can connect to any RGB input on any LCD monitor, giving live readings of all sensors, speed, revs, data logging, and all user selectable.... :wink:
Image
User avatar
User

andyh877

Rank

Non Member

Posts

3709

Joined

Mon Apr 18, 2005 7:11 am

Location

Alpine France


Has thanked: 1 time
Been thanked: 5 times

Postby andyh877 » Wed Oct 25, 2006 5:56 pm

peterg wrote:Get a G-tech from E-bay for £40 and save £120....the only thing of any interest that it seems to do is measure acceleration. I suspect its aimed at people who go 'cruising' to look pretty next to their sat. nav. ,DVD player and neon lights :lol:


just a pice of useless plastic bling :lol: :lol: :lol:
User avatar
User

andyh877

Rank

Non Member

Posts

3709

Joined

Mon Apr 18, 2005 7:11 am

Location

Alpine France


Has thanked: 1 time
Been thanked: 5 times

Postby andyh877 » Wed Oct 25, 2006 6:00 pm

David Gentleman wrote:
gt5 wrote:Are you sure its a yes Dave? Just worried with the; "The RSM can be fitted to any car with a electronic speed input wire running to the ECU" :?

Re; the proper data loggers Andy, i agree much!!better then the RSM but all ime wanting is one of the apexi units to match up with the Apexi boost controller already fitted, suppose the ability to measure accelaration will be good :wink: and g force :wink:

Maybe a stack dash would be nice in the future, but will need to rob some banks 1st, nearly ready for Noble, the water inj is just about fitted, i just need some time off work to get it down there :roll: and hope things with GTA's dont happen in 3's meaning Peter, Lee, and Steve gt5:shock: :twisted:


Ignore the bit where it says ecu, it means is the speedo drive electronic or mechanical. The RSM just wants a speed input which is fine on the GTA.

As for digi dashes, if you went for an Adaptronic, it has a add on box available which can connect to any RGB input on any LCD monitor, giving live readings of all sensors, speed, revs, data logging, and all user selectable.... :wink:


but does the adaptronic interface with multiple ecu types.........

is it used in racing? as the AIM stuff is and they are installed in FR 2000 at the mo

I thought you couldn't get the adaptronic to work Dave?.......
User avatar
User

jules

Rank

Non Member

Posts

458

Joined

Thu Mar 23, 2006 6:32 pm

Location

Wrotham


Has thanked: 1 time
Been thanked: 1 time

Postby jules » Wed Oct 25, 2006 6:30 pm

plugged one into my car recently, just said 'Game Over' :cry:
User avatar
User

peterg

Rank

Non Member

Posts

2501

Joined

Wed Apr 14, 2004 10:26 pm

Location

Cumbria


Has thanked: 0 time
Been thanked: 0 time

Postby peterg » Wed Oct 25, 2006 6:34 pm

I thought you couldn't get the adaptronic to work Dave?.......


Worked on mine. The idle was a bit up and down when the engine got hot, but that was because one of the settings wasnt switched on....or was it off??? Either way, it was nothing to worry about.

GT5....exaclty what do you want the Apexi RSM to do? Other than looking glitzy it appears to do nothing that you are ever likely to need. Its a toy!
User avatar
User

gt5

Rank

Non Member

Posts

594

Joined

Thu Nov 17, 2005 5:35 pm

Location

york


Has thanked: 0 time
Been thanked: 0 time

Postby gt5 » Wed Oct 25, 2006 7:12 pm

well apart from being a toy it would fill up a space above my stereo i already have a afr/egt gauge there and another hole next to it ready for another gauge and if i fill the rest of the space with spa gauges it will cost me fortune but yeah your probably right its pointless i will find something else that usefull :roll:
User avatar
User

peterg

Rank

Non Member

Posts

2501

Joined

Wed Apr 14, 2004 10:26 pm

Location

Cumbria


Has thanked: 0 time
Been thanked: 0 time

Postby peterg » Wed Oct 25, 2006 8:03 pm

Nice carbon fibre panel...£10.....saving you £160 to spend on something to make the car work better! :D
User avatar
User

David Gentleman

Rank

Non Member

Posts

3474

Joined

Thu Apr 15, 2004 8:10 am

Location

Colchester, Essex


Has thanked: 0 time
Been thanked: 0 time

Postby David Gentleman » Wed Oct 25, 2006 8:06 pm

andyh877 wrote:
but does the adaptronic interface with multiple ecu types.........

is it used in racing? as the AIM stuff is and they are installed in FR 2000 at the mo

I thought you couldn't get the adaptronic to work Dave?.......


Why would it interface with other ecus, it is an ecu.... :?:

The AIM stuff is just a fixed display with sensor inputs. The system on the Adaptronic is fully custom, so you could switch from live readings, to full ignition and fuel map displays. Its far more comprehensive...

Where have you been, both Peter and Tony are running the units... :lol:
Image
Next


  • Advertisement

Who is online

Users browsing this forum: No registered users and 119 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France