overheating issues

Renault & Alpine General Discussion

Moderators: eastlmark, BIG_MVS, phildini, Test Moderator, Alpineandy

no avatar
User

Alpineandy

Rank

Club Member

Club Member
Posts

2381

Joined

Mon Jun 14, 2004 8:37 am

Location

North Essex


Has thanked: 5 times
Been thanked: 10 times

Postby Alpineandy » Sat Jan 08, 2011 9:46 pm

I don't have a GTA/A610, so sorry if this is a silly question, but doesn't the GTA have a Rad bleed and a heater bleed :?:
Alpine A110, Renault Safrane 2.5dt, Hudson Kindred Spirit (Renault powered), transAlp (Honda) and Ducati Multistrada
User avatar
User

BIG_MVS

Rank

Club Member

Club Member
Posts

5097

Joined

Wed Jun 30, 2004 9:12 am

Location

Sandbach


Has thanked: 38 times
Been thanked: 72 times

Postby BIG_MVS » Sat Jan 08, 2011 10:03 pm

Dell Boy had some he paid £30 each for which I assume he bought on behalf of the "club" so being a member Juzz he should do you a deal :wink:

Failing that...:

http://www.cqout.com/item.asp?id=2404496
1994 A610 - Montana Red (For Sale)
User avatar
User

Juzzblack

Rank

Non Member

Posts

982

Joined

Sun May 16, 2004 10:49 pm

Location

Charlotte, USA


Has thanked: 0 time
Been thanked: 0 time

Postby Juzzblack » Sat Jan 08, 2011 10:11 pm

Nice one, cheers for the link Martin.

AlpineAndy - there's definitely only the two bleed nipples, one at the rad and one at the thermostat housing, I've got the Renault workshop manual with a diagram showing the whole system.
GTA V6 Turbo - BTW check your earths!

Image

http://www.youtube.com/user/AlpineGTA
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Postby clee » Sat Jan 08, 2011 10:14 pm

buyparts still list it for the 25t :roll: :wink: C'mon now Juzz ! wake up lad !
http://www.buypartsby.co.uk/water-pump- ... eng=2.5000
User avatar
User

JohnC

Rank

Non Member

Posts

2120

Joined

Sun Dec 02, 2007 6:19 pm

Location

Jersey C.I.


Has thanked: 15 times
Been thanked: 83 times

Postby JohnC » Sat Jan 08, 2011 10:25 pm

Justin, A little tip if you have not thought of it before..... when you get around to replacing the pump, save the coolant that you have just filled up with by draining the heads and pump via the rad bleed tube. :wink:
1990 GTA Atmo, 2003 Jaguar X type 2.5SE Auto, 2018 Kia Picanto GT-Line-S 1.25
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Postby clee » Sat Jan 08, 2011 10:30 pm

I know GTA owners are tight but that's a new level :lol:
User avatar
User

Juzzblack

Rank

Non Member

Posts

982

Joined

Sun May 16, 2004 10:49 pm

Location

Charlotte, USA


Has thanked: 0 time
Been thanked: 0 time

Postby Juzzblack » Sun Jan 09, 2011 11:15 am

clee wrote:buyparts still list it for the 25t :roll: :wink: C'mon now Juzz ! wake up lad !
http://www.buypartsby.co.uk/water-pump- ... eng=2.5000


Doh! I forgot to check for R25 :oops:

Cheers Lee. :D
GTA V6 Turbo - BTW check your earths!

Image

http://www.youtube.com/user/AlpineGTA
User avatar
User

stephendell

Rank

Club Member

Club Member
Posts

7463

Joined

Wed Apr 14, 2004 7:25 pm

Location

London


Has thanked: 125 times
Been thanked: 102 times

Postby stephendell » Sun Jan 09, 2011 12:13 pm

Cheapos are all long gone (there were only 3 or 4) but have the unipart/qh ones for £70.

I do know someone paid close to £200 for one recently :(
Trafic, Twingo GT, Vel Satis Turbo x 2, Clio V6 Proto Ph2, Vel Satis 3.5, Avantime, Alpine A610, GTA Atmo x 3, GTA Turbo x 3, R5 Gordini Turbo Mid Engine, Alpine A310 4cyl, Alpine A110, Yellow Smart
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Postby clee » Sun Jan 09, 2011 1:34 pm

Espace ones will fit .You have to alter the sensor port on the LHS .Chop it short and then tap it m18 to suit the GTA one .
User avatar
User

Juzzblack

Rank

Non Member

Posts

982

Joined

Sun May 16, 2004 10:49 pm

Location

Charlotte, USA


Has thanked: 0 time
Been thanked: 0 time

Postby Juzzblack » Sun Jan 09, 2011 7:36 pm

I've ordered the R25 turbo one from buypartsby. :)
GTA V6 Turbo - BTW check your earths!

Image

http://www.youtube.com/user/AlpineGTA
User avatar
User

Juzzblack

Rank

Non Member

Posts

982

Joined

Sun May 16, 2004 10:49 pm

Location

Charlotte, USA


Has thanked: 0 time
Been thanked: 0 time

Postby Juzzblack » Sat Jan 15, 2011 8:10 pm

Fitted the new water pump today. Couldn't see much wrong with the old one apart from some free-play in the pulley. The impeller looked fine though. Anyway, fitted the new one as the old one was noisy, probably due to the play in it. I took JohnC's advise and bled the system whilst the rear was still on the ramps, so the back of the car was slightly elevated to aid bleeding.
I started it up and ran it at a fast idle for a few minutes. Took much longer this time for everything to get hot which I took as a good sign. The front rad hoses got hot this time, the stat opened around the 90 mark on the temp gauge, maybe just before the 90 mark, which seems spot on as the stat is rated at 88 deg. I continued to run it, it seemed to take an age - again, a good sign - but eventually the rad fan kicked in. The temp gauge didn't go anywhere near the red and the cabin heater was nice and toasty. :D No blowing cold air. Everything is looking good so far. I'll check the coolant level when it's nice and cold in the morning and give it a small run to check it's still ok. :D
I can only guess I had an air lock somewhere as the old pump still seemed to have a decent working impeller despite the play in it.
I did notice though, while I had all the hoses off, the bottom hose was routed wrong. It was routed over the HT leads rail that runs across the rear of the engine and which bolts to the back of the water pump. So the bottom hose was sat too high relative to the water pump and thermostat housing. Maybe this has prevented proper bleeding of the system in the past and been the cause of the problem? It was also having the effect of pushing the top hose up against the throttle cable lever and causing my throttle to stick occasionally. So I re-routed it correctly under the HT leads rail when I re-fitted it to the pump.
Don't know why I hadn't spotted this before. I actually replaced the bottom hose myself last year but just routed it the same way as the old one I removed, assuming that would be correct. I did have both hoses replaced by a garage some years ago and the cylinder head gaskets done by another garage a few years ago too, so I'm guessing one of these occasions is when the bottom hose was routed the wrong way and I've just copied it since until I noticed the error today. It wasn't me! :P
Anyway, hopefully it's sorted now. Thanks for everyone's help and advice. :D
GTA V6 Turbo - BTW check your earths!

Image

http://www.youtube.com/user/AlpineGTA
User avatar
User

simontaylor

Rank

Non Member

Posts

5602

Joined

Thu Apr 15, 2004 12:33 pm

Location

Fleet, Hampshire


Has thanked: 44 times
Been thanked: 56 times

Postby simontaylor » Sat Jan 15, 2011 9:12 pm

Have a good run tomorrow.....
1986 : '86 GTA v6 BW-EFR turbo, with Adaptronic ECU
Firsts at
2007 : Gurston Down & RAOC Champion
2008 : Rushmoor & Eelmoor & ACSMC Hillclimb class Champion
2009 : Longcross & Eelmoor
2010 : Crystal Palace & Eelmoor
2016 : Rushmoor & 5th O/A
User avatar
User

JohnC

Rank

Non Member

Posts

2120

Joined

Sun Dec 02, 2007 6:19 pm

Location

Jersey C.I.


Has thanked: 15 times
Been thanked: 83 times

Postby JohnC » Sat Jan 15, 2011 10:22 pm

Looking good Justin :D .....but don`t be too surprised if you have to add coolant, as there is always likely to be a bit of air in the system after you refill it... and you may have to top up a couple of times also before the level stabilizes.
Best of luck on the run tomorrow :wink:
1990 GTA Atmo, 2003 Jaguar X type 2.5SE Auto, 2018 Kia Picanto GT-Line-S 1.25
Previous


  • Advertisement

Who is online

Users browsing this forum: No registered users and 209 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France