looking for a gta turbo bell housing& flywheel

hi guys
im trying to find if possible a bellhousing and flywheel, for a gta turbo to put into my 310 v6 that im putting a 3 litre laguna motor in.
so i dont have to have a chopper wheel on my crank pulley, for my after market injection system.
if any one can help, or if anybody has machined a stock bellhousing to take a tdc sensor, love to hear from you..
paul.

[BIG_MVS]

Think you may struggle with the Bell housing, Clee is your best bet for the flywheel I reckon.

Sorry Paul. Meant to reply on Fbook. Yes I have both flywheel and a good bellhousing with sensor port. It does need an arm pivot stud but you can rob that from the one you have.