Clutch Master Cylinder

Renault & Alpine General Discussion

Moderators: eastlmark, BIG_MVS, phildini, Test Moderator, Alpineandy

no avatar
User

rupert

Rank

Non Member

Posts

1323

Joined

Mon Apr 19, 2004 7:39 pm

Location

Plymouth, Devon


Has thanked: 2 times
Been thanked: 9 times

Clutch Master Cylinder

Postby rupert » Fri Apr 15, 2011 1:50 pm

Anyone know the atmo part no by any chance. I've trawled through a word search and come up with two....

7700 716 684 and 6001 007 297

Also, current symptom is that the clutch needs pumping at the pedal to disengage and then if you hold your foot on the pedal it slowly it goes away and the gear starts to drag.

I'd have thought that if it were the master cylinder gone there'd be leaking fluid. If no fluid then air in the system.

Agreed?
User avatar
User

simontaylor

Rank

Non Member

Posts

5602

Joined

Thu Apr 15, 2004 12:33 pm

Location

Fleet, Hampshire


Has thanked: 44 times
Been thanked: 56 times

Postby simontaylor » Fri Apr 15, 2011 3:43 pm

Brakes International maybe able to supply one?
1986 : '86 GTA v6 BW-EFR turbo, with Adaptronic ECU
Firsts at
2007 : Gurston Down & RAOC Champion
2008 : Rushmoor & Eelmoor & ACSMC Hillclimb class Champion
2009 : Longcross & Eelmoor
2010 : Crystal Palace & Eelmoor
2016 : Rushmoor & 5th O/A
no avatar
User

rupert

Rank

Non Member

Posts

1323

Joined

Mon Apr 19, 2004 7:39 pm

Location

Plymouth, Devon


Has thanked: 2 times
Been thanked: 9 times

Postby rupert » Fri Apr 15, 2011 5:40 pm

I think Mr D has a nearly new one.... I'll be up to the Ace on Monday then.
User avatar
User

JohnC

Rank

Non Member

Posts

2120

Joined

Sun Dec 02, 2007 6:19 pm

Location

Jersey C.I.


Has thanked: 15 times
Been thanked: 83 times

Postby JohnC » Fri Apr 15, 2011 6:40 pm

Oops.....sorry.... I misread the title :oops: :oops: :oops: .....assuming there is no leakage from the slave cylinder....the master cylinder is the most likely as it has a non return valve in it, which sounds as if it is passing a small amount of fluid back up to the reservoir when under pressure from the clutch...which it should not do.
You have got the part No. correct on one of your numbers, namely 60 01 007 297 which is the master cylinder for D500/501/502.
Sorry Rupert for answering before my brain was in gear. :oops: :oops: :oops:

John
Last edited by JohnC on Thu Apr 21, 2011 9:17 pm, edited 3 times in total.
1990 GTA Atmo, 2003 Jaguar X type 2.5SE Auto, 2018 Kia Picanto GT-Line-S 1.25
User avatar
User

phildini

Rank

Club Member

Club Member
Posts

1736

Joined

Sun Apr 18, 2004 10:00 am

Location

Epsom Surrey/ Venezia Italy


Has thanked: 7 times
Been thanked: 0 time

Postby phildini » Sat Apr 16, 2011 9:33 am

Rupert

My A610 was sitting around for 10 years, a bit like your car from one garage to another, moisture gets into everything especially brake and clutch master cylinders.

I had to replace the one on my 610....... what a drama!!!! I think the GTA is much easier. Could not get it into gear, when i replace it I also had to bleed the brakes again!! waisted LTR's of fluid as before I tried replacing the seals which was a waste of time.....
84 R5 Le Car2 Turbo, 95 Clio 16V mk1, 68 Alfa Romeo 1750 GTV, 99 Mitsubishi Evo VI, 06 Porsche Boxster, 11 Lotus Evora S
User avatar
User

Miles

Rank

Non Member

Posts

725

Joined

Thu Apr 14, 2005 9:06 am

Location

Hampshire


Has thanked: 35 times
Been thanked: 10 times

clutch

Postby Miles » Sat Apr 16, 2011 8:52 pm

Rupert, your symptons are the same as my car, when I first purchased it. Changed both brake cylinder.
no avatar
User

rupert

Rank

Non Member

Posts

1323

Joined

Mon Apr 19, 2004 7:39 pm

Location

Plymouth, Devon


Has thanked: 2 times
Been thanked: 9 times

Postby rupert » Thu Apr 21, 2011 10:07 am

JohnC wrote:You have got the part No. correct on one of your numbers, namely 77 10 203 277 which is for D500/501/502.
Sorry Rupert for answering before my brain was in gear. :oops: :oops: :oops:

John


Do you mean 77 01 203 277 ?
User avatar
User

JohnC

Rank

Non Member

Posts

2120

Joined

Sun Dec 02, 2007 6:19 pm

Location

Jersey C.I.


Has thanked: 15 times
Been thanked: 83 times

Postby JohnC » Thu Apr 21, 2011 12:20 pm

I don`t know what is happening to me on this :oops: ..... I have just checked and double checked again and I gave you the wrong number again, but here are the correct ones:-
Clutch master cylinder....60 01 007 297
and just in case, the slave cylinder....77 00 732 756
That should be right now :wink:
Put it down to a senior moment....or two :lol: :lol: :lol:
1990 GTA Atmo, 2003 Jaguar X type 2.5SE Auto, 2018 Kia Picanto GT-Line-S 1.25
no avatar
User

rupert

Rank

Non Member

Posts

1323

Joined

Mon Apr 19, 2004 7:39 pm

Location

Plymouth, Devon


Has thanked: 2 times
Been thanked: 9 times

Postby rupert » Tue Apr 26, 2011 3:31 pm

as expected it now needs a slave cylinder. In fact i'm not sure the master had anything wrong. . . Bloody garage. So now i'm desperately searching for one. 10 days order at renault.
User avatar
User

andyh877

Rank

Non Member

Posts

3709

Joined

Mon Apr 18, 2005 7:11 am

Location

Alpine France


Has thanked: 1 time
Been thanked: 5 times

Postby andyh877 » Thu Apr 28, 2011 7:42 am

available from france....... in stock


  • Advertisement

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 193 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France