GTA Doors

Renault & Alpine General Discussion

Moderators: eastlmark, BIG_MVS, phildini, Test Moderator, Alpineandy

no avatar
User

rob1

Rank

Non Member

Posts

14

Joined

Mon May 30, 2005 11:28 am

Location

Warwickshire


Has thanked: 0 time
Been thanked: 0 time

GTA Doors

Postby rob1 » Mon May 30, 2005 5:43 pm

Am I the only one that has had the door hinges delaminate from the door frame :?:

any suggestions on how to fix this would make my week :D
User avatar
User

mitchella

Rank

Non Member

Posts

302

Joined

Sat Apr 24, 2004 12:23 am

Location

Penicuik, Scotland


Has thanked: 0 time
Been thanked: 0 time

Postby mitchella » Wed Jun 01, 2005 8:32 am

Can you explain a bit more about the problem? I've replaced the door hinges and part of one of the supports built into the door had become detached from the door - sorted it with a blob of fibreglass and then built up a bit round about it just to add some strength. Is this the problem or is it something different?
no avatar
User

stephen rodgers

Rank

Non Member

Posts

30

Joined

Sat Mar 12, 2005 3:20 pm

Location

stoke on trent


Has thanked: 0 time
Been thanked: 0 time

DOOR HINGES

Postby stephen rodgers » Sat Jun 04, 2005 3:04 pm

I HAVE THAT SAME PROBLEM,THE TOP DRIVERS HINGE HAS COME AWAY FROM THE POST ALSO THE BOTTOM PASSENGER HINGE ,APPARENTLY ITS NOT TOO HARD A JOB [JUST NEEDS BONDING BACK ON] BUT I NEED TO FIND A GOOD BODY SHOP TO DO IT ,I LIVE IN STOKE ON TRENT ANY IDEAS
hello all.
User avatar
User

pgoldsmith

Rank

Non Member

Posts

994

Joined

Tue Jul 20, 2004 12:14 pm

Location

West Moors, Dorset


Has thanked: 3 times
Been thanked: 10 times

Postby pgoldsmith » Sat Jun 04, 2005 6:03 pm

If your in the Stoke area then see a chap called Rob Woodall he's a specialist in GTAs.
no avatar
User

rob1

Rank

Non Member

Posts

14

Joined

Mon May 30, 2005 11:28 am

Location

Warwickshire


Has thanked: 0 time
Been thanked: 0 time

Postby rob1 » Sat Jun 04, 2005 9:50 pm

Cheers Guys

As you say the hinges have broken somehow,

Did try Laying up glass fibre between the door skin and the hinge and was only successful for a while, I May try the Guy mentioned in the Stoke area if you could forward his details it would help me out! as I was thinking about cutting the door about and using a plate on the cockpit side of the door to give the hinge something to bolt onto!!!!!
no avatar
User

stephen rodgers

Rank

Non Member

Posts

30

Joined

Sat Mar 12, 2005 3:20 pm

Location

stoke on trent


Has thanked: 0 time
Been thanked: 0 time

DOOR HINGES

Postby stephen rodgers » Tue Jun 07, 2005 7:20 pm

Could do with a number or something for Rob woodall in STOKE ,
THAT WOULD BE A BIG HELP ,THANKS
hello all.
User avatar
User

pgoldsmith

Rank

Non Member

Posts

994

Joined

Tue Jul 20, 2004 12:14 pm

Location

West Moors, Dorset


Has thanked: 3 times
Been thanked: 10 times

Postby pgoldsmith » Wed Jun 08, 2005 7:52 am

Stephen,
I've sent you a PM.
Cheers,
no avatar
User

Matt200

Rank

Club Member

Club Member
Posts

15

Joined

Sun Aug 24, 2008 3:53 pm


Has thanked: 0 time
Been thanked: 0 time

Door hinges

Postby Matt200 » Fri Mar 27, 2009 1:18 pm

Hi,

My drivers door top hinge has just dropped with the same problem, hinges on the pillar are fine, but the top on has come away inside the door.

Can anyone recommend anyone in the Home Counties/London area that could fix it - or bearing in mind these previous posts are almost four years old, is there a 'best-fix' nowadays?

Cheers

Matt
User avatar
User

Stunned Monkey

Rank

Non Member

Posts

1514

Joined

Tue Apr 12, 2005 12:24 am

Location

Nr Chippenham, Wiltshire


Has thanked: 0 time
Been thanked: 3 times

Postby Stunned Monkey » Fri Mar 27, 2009 2:04 pm

Behind the fibgrglass of the frame is a steel structure to which the door bolts, and it's this that rots through. The proper fix is to cut away the fibreglass, replace the steel section, then repair the glass and re-spray. It can happen both in the pillar and in the door.
Martin - PRV Tinkerererer
www.delorean.co.uk
no avatar
User

Matt200

Rank

Club Member

Club Member
Posts

15

Joined

Sun Aug 24, 2008 3:53 pm


Has thanked: 0 time
Been thanked: 0 time

Postby Matt200 » Fri Mar 27, 2009 2:32 pm

Cheers, that'll account for the rust in the bottom of the door :(

Fingers crossed it can be fixed without affecting the exterior of the door as that was only resprayed recently...


  • Advertisement

Who is online

Users browsing this forum: Google [Bot] and 292 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France