too much boost

I shortened the feed tube from the plenum to the ART bleed valve just to tidy things up as it was flapping about a bit ,didn't give it another thought .Been out today and it was hitting 20 psi
I have had to reset the valve ,scared the bejeebus out of me when it did it and never felt the plenums as hot

Are you sure you've not got a split or some kind of leak in the hose?

I thought that at first ,but was all OK .
I can't fathom why shortening the tube should make such a huge difference though It was set at 16 peak but was running 20+ and it's effing hot today .I have cleaned the valve and put a new piece of tube on in any case
I took about 6" off the length so now it's 3" from the outlet .

Edit Thanks Darren I didn't check the pipe to the actuator properly It's got a split right at the jube clip

Silly boy.

At least nothing went kerblamo!

The plenums were so hot I thought they'd melt
Assumption is the mother of all f##k-ups

be careful when you do the bearings mate

be careful when you do the bearings mate

I'm not doing them
Can't afford them at the mo ,so they are going on account
30 days grace
Tip top ..................build a relationship wth your local grease monkey( sorry ,PC, Automotive Technician ) + he must have had 6 holidays on my first GTA bills

be careful when you do the bearings mate

I'm not doing them
Can't afford them at the mo ,so they are going on account
30 days grace
Tip top ..................build a relationship wth your local grease monkey( sorry ,PC, Automotive Technician ) + he must have had 6 holidays on my first GTA bills