injectors

Renault & Alpine General Discussion
User avatar
User

simontaylor

Rank

Non Member

Posts

5602

Joined

Thu Apr 15, 2004 12:33 pm

Location

Fleet, Hampshire


Has thanked: 44 times
Been thanked: 56 times

Postby simontaylor » Thu Feb 16, 2006 6:10 pm

Their web site says they do the lot, but I'll be calling Graham in the morning just to double check.
1986 : '86 GTA v6 BW-EFR turbo, with Adaptronic ECU
Firsts at
2007 : Gurston Down & RAOC Champion
2008 : Rushmoor & Eelmoor & ACSMC Hillclimb class Champion
2009 : Longcross & Eelmoor
2010 : Crystal Palace & Eelmoor
2016 : Rushmoor & 5th O/A
User avatar
User

orbut12

Rank

Non Member

Posts

203

Joined

Fri Nov 19, 2004 8:27 pm

Location

Edinburgh


Has thanked: 0 time
Been thanked: 0 time

Postby orbut12 » Fri Feb 17, 2006 9:27 pm

spot the clean one 8)

Image
User avatar
User

Juzzblack

Rank

Non Member

Posts

982

Joined

Sun May 16, 2004 10:49 pm

Location

Charlotte, USA


Has thanked: 0 time
Been thanked: 0 time

Postby Juzzblack » Sat Feb 18, 2006 4:17 pm

It's a trick question isn't it! :D :P
GTA V6 Turbo - BTW check your earths!

Image

http://www.youtube.com/user/AlpineGTA
User avatar
User

orbut12

Rank

Non Member

Posts

203

Joined

Fri Nov 19, 2004 8:27 pm

Location

Edinburgh


Has thanked: 0 time
Been thanked: 0 time

Postby orbut12 » Sat Feb 18, 2006 5:41 pm

it is.......all clean now :P :)
User avatar
User

simontaylor

Rank

Non Member

Posts

5602

Joined

Thu Apr 15, 2004 12:33 pm

Location

Fleet, Hampshire


Has thanked: 44 times
Been thanked: 56 times

Postby simontaylor » Wed Feb 22, 2006 8:08 pm

peterg wrote:Yes i used them....they cleaned and serviced (replaced the rubbers, caps and other bits) for £20 each and sent me reading to show the improvement. Turned them around in 2 days.


Just got mine back from HGL motors in Hull, Only posted them out on Monday.

The report showed spray patterns as Good (as oposed to fair or bad) and Leak test as OK (as opposed to fail), both before and after for all 6 injectors. Flow rates were 48 50 51 50 50 49 before and 51 for all after. All top seals, filters, bottom seal and Pintle caps replaced (all old ones were returned to me).

That looks like a flow rate gain of (8/6)fifty-oneths, or 2.6% overall, or about 5bhp for my 200-ish...... not bad for £10 each, (+VAT = £70.50).

Bodies not cleaned like orbut12 though.
1986 : '86 GTA v6 BW-EFR turbo, with Adaptronic ECU
Firsts at
2007 : Gurston Down & RAOC Champion
2008 : Rushmoor & Eelmoor & ACSMC Hillclimb class Champion
2009 : Longcross & Eelmoor
2010 : Crystal Palace & Eelmoor
2016 : Rushmoor & 5th O/A
User avatar
User

David Gentleman

Rank

Non Member

Posts

3474

Joined

Thu Apr 15, 2004 8:10 am

Location

Colchester, Essex


Has thanked: 0 time
Been thanked: 0 time

Postby David Gentleman » Wed Feb 22, 2006 9:07 pm

simontaylor wrote:
Bodies not cleaned like orbut12 though.


If he doesnt repaint them they rust like anything...
Image
User avatar
User

simontaylor

Rank

Non Member

Posts

5602

Joined

Thu Apr 15, 2004 12:33 pm

Location

Fleet, Hampshire


Has thanked: 44 times
Been thanked: 56 times

Postby simontaylor » Wed Feb 22, 2006 9:31 pm

David Gentleman wrote:
simontaylor wrote:
Bodies not cleaned like orbut12 though.


If he doesnt repaint them they rust like anything...


Oh well.... 1 less thing for me to do then.
1986 : '86 GTA v6 BW-EFR turbo, with Adaptronic ECU
Firsts at
2007 : Gurston Down & RAOC Champion
2008 : Rushmoor & Eelmoor & ACSMC Hillclimb class Champion
2009 : Longcross & Eelmoor
2010 : Crystal Palace & Eelmoor
2016 : Rushmoor & 5th O/A
User avatar
User

peterg

Rank

Non Member

Posts

2501

Joined

Wed Apr 14, 2004 10:26 pm

Location

Cumbria


Has thanked: 0 time
Been thanked: 0 time

Postby peterg » Wed Feb 22, 2006 9:43 pm

simontaylor wrote:
peterg wrote:Yes i used them....they cleaned and serviced (replaced the rubbers, caps and other bits) for £20 each and sent me reading to show the improvement. Turned them around in 2 days.


Just got mine back from HGL motors in Hull, Only posted them out on Monday.

The report showed spray patterns as Good (as oposed to fair or bad) and Leak test as OK (as opposed to fail), both before and after for all 6 injectors. Flow rates were 48 50 51 50 50 49 before and 51 for all after. All top seals, filters, bottom seal and Pintle caps replaced (all old ones were returned to me).

That looks like a flow rate gain of (8/6)fifty-oneths, or 2.6% overall, or about 5bhp for my 200-ish...... not bad for £10 each, (+VAT = £70.50).

Bodies not cleaned like orbut12 though.


I was also impressed by the gains on paper...some of them were massive....and mine came back with all servicable parts renewed and looking like new :wink: :lol:
Previous


  • Advertisement

Who is online

Users browsing this forum: No registered users and 178 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France